v5.0.0

.github/CODEOWNERS

@@ -0,0 +1,3 @@
+* @Paebbels
+
+/.github/ @Paebbels

.github/dependabot.yml

@@ -10,7 +10,5 @@ updates:
       - Dependencies
     assignees:
       - Paebbels
-    reviewers:
-      - Paebbels
     schedule:
       interval: "daily"    # Checks on Monday trough Friday.

.github/workflows/ApplicationTesting.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -134,20 +134,21 @@ jobs:
 
           packages = {
             "coverage":            "python-coverage:p",
-            "docstr_coverage":     "python-pyyaml:p",
+            "docstr_coverage":     "python-pyyaml:p python-types-pyyaml:p",
             "igraph":              "igraph:p",
             "jinja2":              "python-markupsafe:p",
             "lxml":                "python-lxml:p",
             "numpy":               "python-numpy:p",
             "markupsafe":          "python-markupsafe:p",
             "pip":                 "python-pip:p",
-            "pyyaml":              "python-pyyaml:p",
+            "pyyaml":              "python-pyyaml:p python-types-pyyaml:p",
             "ruamel.yaml":         "python-ruamel-yaml:p python-ruamel.yaml.clib:p",
             "sphinx":              "python-markupsafe:p",
             "tomli":               "python-tomli:p",
             "wheel":               "python-wheel:p",
             "pyEDAA.ProjectModel": "python-ruamel-yaml:p python-ruamel.yaml.clib:p python-lxml:p",
             "pyEDAA.Reports":      "python-ruamel-yaml:p python-ruamel.yaml.clib:p python-lxml:p",
+            "sphinx-reports":      "python-markupsafe:p python-pyaml:p python-types-pyyaml:p",
           }
           subPackages = {
             "pytooling": {

.github/workflows/ArtifactCleanUp.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

.github/workflows/BuildTheDocs.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -38,7 +38,7 @@ jobs:
 
     steps:
       - name: '❗ Deprecation message'
-        run: printf "%s\n" "::warning title=Deprecated::'BuildTheDocs.yml' is not maintained anymore. Please switch to 'SphinxDocumentation.yml', 'LaTeXDocumentation.yml' and 'ExtractConfiguration.yml'."
+        run: printf "::warning title=%s::%s\n" "Deprecated" "'BuildTheDocs.yml' is not maintained anymore. Please switch to 'SphinxDocumentation.yml', 'LaTeXDocumentation.yml' and 'ExtractConfiguration.yml'."
 
       - name: ⏬ Checkout repository
         uses: actions/checkout@v4

.github/workflows/CheckDocumentation.yml

@@ -3,7 +3,7 @@
 #   Patrick Lehmann                                                                                                    #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -64,9 +64,20 @@ jobs:
       - name: Run 'interrogate' Documentation Coverage Check
         continue-on-error: true
         run: |
-          interrogate -c pyproject.toml --fail-under=${{ inputs.fail_under }} && printf "%s\n" "::error title=interrogate::Insufficient documentation quality (goal: ${{ inputs.fail_under }})"
+          set +e
+
+          interrogate -c pyproject.toml --fail-under=${{ inputs.fail_under }} ${{ inputs.directory }}
+          if [[ $? -ne 0 ]]; then
+            printf "::error title=%s::%s\n" "interrogate" "Insufficient documentation quality (goal: ${{ inputs.fail_under }})"
+          fi
 
       - name: Run 'docstr_coverage' Documentation Coverage Check
         continue-on-error: true
         run: |
-          docstr-coverage -v 2 --fail-under=${{ inputs.fail_under }} ${{ inputs.directory }} && printf "%s\n" "::error title=docstr-coverage::Insufficient documentation quality (goal: ${{ inputs.fail_under }})"
+          set +e
+
+          docstr-coverage --fail-under=${{ inputs.fail_under }} ${{ inputs.directory }}
+          if [[ $? -ne 0 ]]; then
+            printf "%s\n" "::error title=docstr-coverage::Insufficient documentation quality (goal: ${{ inputs.fail_under }})"
+          fi
+

.github/workflows/CompletePipeline.yml

@@ -3,7 +3,7 @@
 #   Patrick Lehmann                                                                                                    #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -96,23 +96,23 @@ on:
       codecov:
         description: 'Publish merged coverage and unittest reports to Codecov.'
         required: false
-        default: false
+        default: 'false'
-        type: boolean
+        type:    string
       codacy:
         description: 'Publish merged coverage report to Codacy.'
         required: false
-        default: false
+        default: 'false'
-        type: boolean
+        type: string
       dorny:
         description: 'Publish merged unittest report via Dorny Test-Reporter.'
         required: false
-        default: false
+        default: 'false'
-        type: boolean
+        type: string
       cleanup:
         description: 'Cleanup artifacts afterwards.'
         required: false
-        default: true
+        default: 'true'
-        type: boolean
+        type: string
     secrets:
       PYPI_TOKEN:
         description: "Token for pushing releases to PyPI."
@@ -120,11 +120,14 @@ on:
       CODECOV_TOKEN:
         description: "Token for pushing coverage and unittest results to Codecov."
         required: false
-      CODACY_PROJECT_TOKEN:
+      CODACY_TOKEN:
         description: "Token for pushing coverage results to Codacy."
         required: false
 
 jobs:
+  Prepare:
+    uses: pyTooling/Actions/.github/workflows/PrepareJob.yml@main
+
   ConfigParams:
     uses: pyTooling/Actions/.github/workflows/ExtractConfiguration.yml@main
     with:
@@ -143,17 +146,29 @@ jobs:
       exclude_list:        ${{ inputs.unittest_exclude_list }}
       disable_list:        ${{ inputs.unittest_disable_list }}
 
-  AppTestingParams:
+#  AppTestingParams:
+#    uses: pyTooling/Actions/.github/workflows/Parameters.yml@main
+#    with:
+#      package_namespace:   ${{ inputs.package_namespace }}
+#      package_name:        ${{ inputs.package_name }}
+#      python_version:      ${{ inputs.apptest_python_version }}
+#      python_version_list: ${{ inputs.apptest_python_version_list }}
+#      system_list:         ${{ inputs.apptest_system_list }}
+#      include_list:        ${{ inputs.apptest_include_list }}
+#      exclude_list:        ${{ inputs.apptest_exclude_list }}
+#      disable_list:        ${{ inputs.apptest_disable_list }}
+
+  InstallParams:
     uses: pyTooling/Actions/.github/workflows/Parameters.yml@main
     with:
       package_namespace:   ${{ inputs.package_namespace }}
       package_name:        ${{ inputs.package_name }}
-      python_version:      ${{ inputs.apptest_python_version }}
+      python_version:      ${{ inputs.unittest_python_version }}
-      python_version_list: ${{ inputs.apptest_python_version_list }}
+      python_version_list: ''
-      system_list:         ${{ inputs.apptest_system_list }}
+      system_list:         ${{ inputs.unittest_system_list }}
-      include_list:        ${{ inputs.apptest_include_list }}
+      include_list:        ${{ inputs.unittest_include_list }}
-      exclude_list:        ${{ inputs.apptest_exclude_list }}
+      exclude_list:        ${{ inputs.unittest_exclude_list }}
-      disable_list:        ${{ inputs.apptest_disable_list }}
+      disable_list:        ${{ inputs.unittest_disable_list }}
 
   UnitTesting:
     uses: pyTooling/Actions/.github/workflows/UnitTesting.yml@main
@@ -190,18 +205,29 @@ jobs:
       - UnitTestingParams
     with:
       python_version: ${{ needs.UnitTestingParams.outputs.python_version }}
-      directory:      ${{ inputs.package_namespace }}/${{ inputs.package_name }}
+      directory:      ${{ needs.ConfigParams.outputs.package_directory }}
-#      fail_below: 70
 
   Package:
     uses: pyTooling/Actions/.github/workflows/Package.yml@main
     needs:
       - UnitTestingParams
-      - UnitTesting
+#      - UnitTesting
     with:
       python_version: ${{ needs.UnitTestingParams.outputs.python_version }}
       artifact:       ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).package_all }}
 
+  Install:
+    uses: pyTooling/Actions/.github/workflows/InstallPackage.yml@main
+    needs:
+      - ConfigParams
+      - UnitTestingParams
+      - InstallParams
+      - Package
+    with:
+      jobs:         ${{ needs.InstallParams.outputs.python_jobs }}
+      wheel:        ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).package_all }}
+      package_name: ${{ needs.ConfigParams.outputs.package_fullname }}
+
 #  AppTesting:
 #    uses: pyTooling/Actions/.github/workflows/ApplicationTesting.yml@main
 #    needs:
@@ -233,7 +259,7 @@ jobs:
       codacy:                         ${{ inputs.codacy }}
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
-      CODACY_TOKEN:  ${{ secrets.CODACY_PROJECT_TOKEN }}
+      CODACY_TOKEN:  ${{ secrets.CODACY_TOKEN }}
 
   PublishTestResults:
     uses: pyTooling/Actions/.github/workflows/PublishTestResults.yml@main
@@ -242,13 +268,11 @@ jobs:
       - UnitTestingParams
       - UnitTesting
     with:
-      additional_merge_args:  '-d "--pytest=rewrite-dunder-init;reduce-depth:pytest.tests.unit"'
+      testsuite-summary-name: ${{ needs.ConfigParams.outputs.package_fullname }}
-      testsuite-summary-name: ${{ inputs.package_name }}
       merged_junit_filename:  ${{ needs.ConfigParams.outputs.unittest_merged_report_xml_filename }}
       merged_junit_artifact:  ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).unittesting_xml }}
       dorny:                  ${{ inputs.dorny }}
       codecov:                ${{ inputs.codecov }}
-
     secrets:
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
 
@@ -281,8 +305,7 @@ jobs:
       - UnitTestingParams
       - PublishCoverageResults
       - PublishTestResults
-      - Documentation
+    if: inputs.cleanup  == 'true'
-    if: ${{ inputs.cleanup }}
     with:
       sqlite_coverage_artifacts_prefix: ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).codecoverage_sqlite }}-
       xml_unittest_artifacts_prefix:    ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).unittesting_xml }}-
@@ -310,20 +333,51 @@ jobs:
       coverage: ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).codecoverage_html }}
       typing:   ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).statictyping_html }}
 
-  ReleasePage:
+  TriggerTaggedRelease:
-    uses: pyTooling/Actions/.github/workflows/Release.yml@main
+    uses: pyTooling/Actions/.github/workflows/TagReleaseCommit.yml@main
-    if: startsWith(github.ref, 'refs/tags')
     needs:
-      - Package
+      - Prepare
+      - UnitTesting
+      - Install
 #      - AppTesting
+#      - StaticTypeCheck
+      - Package
       - PublishToGitHubPages
+    if: needs.Prepare.outputs.is_release_commit
+    permissions:
+      contents: write  # required for create tag
+      actions:  write  # required for trigger workflow
+    with:
+      version:  ${{ needs.Prepare.outputs.version }}
+      auto_tag: ${{ needs.Prepare.outputs.is_release_commit }}
+    secrets: inherit
+
+  ReleasePage:
+    uses: pyTooling/Actions/.github/workflows/PublishReleaseNotes.yml@main
+    needs:
+      - Prepare
+      - UnitTesting
+      - Install
+#      - AppTesting
+#      - StaticTypeCheck
+      - Package
+      - PublishToGitHubPages
+    if: needs.Prepare.outputs.is_release_tag == 'true'
+    permissions:
+      contents: write
+      actions:  write
+    with:
+      tag: ${{ needs.Prepare.outputs.version }}
+    secrets: inherit
 
   PublishOnPyPI:
     uses: pyTooling/Actions/.github/workflows/PublishOnPyPI.yml@main
-    if: startsWith(github.ref, 'refs/tags')
     needs:
+      - Prepare
       - UnitTestingParams
+      - Package
       - ReleasePage
+    if: needs.Prepare.outputs.is_release_tag == 'true'
     with:
       python_version: ${{ needs.UnitTestingParams.outputs.python_version }}
       requirements: -r dist/requirements.txt
@@ -344,7 +398,7 @@ jobs:
       - PublishToGitHubPages
 #      - PublishOnPyPI
       - IntermediateCleanUp
-    if: ${{ inputs.cleanup }}
+    if: inputs.cleanup  == 'true'
     with:
       package: ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).package_all }}
       remaining: |

.github/workflows/CoverageCollection.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -72,7 +72,7 @@ jobs:
 
     steps:
       - name: '❗ Deprecation message'
-        run: printf "%s\n" "::warning title=Deprecated::'CoverageCollection.yml' is not maintained anymore. Please switch to 'UnitTesting.yml', 'PublishCoverageResults.yml' and 'PublishTestResults.yml'."
+        run: printf "::warning title=%s::%s\n" "Deprecated" "'CoverageCollection.yml' is not maintained anymore. Please switch to 'UnitTesting.yml', 'PublishCoverageResults.yml' and 'PublishTestResults.yml'."
 
       - name: ⏬ Checkout repository
         uses: actions/checkout@v4

.github/workflows/ExtractConfiguration.yml

@@ -3,7 +3,7 @@
 #   Patrick Lehmann                                                                                                    #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -145,6 +145,12 @@ jobs:
           namespace = "${{ inputs.package_namespace }}".strip()
           name = "${{ inputs.package_name }}".strip()
 
+          print(dedent(f"""\
+            INPUTS:
+              package_namespace: {namespace}
+              package_name:      {name}
+          """))
+
           if namespace == "" or namespace == ".":
             fullname = f"{name}"
             directory = f"{name}"
@@ -154,6 +160,13 @@ jobs:
             directory = f"{namespace}/{name}"
             mypy_prepare_command = f"touch {namespace}/__init__.py"
 
+          print(dedent(f"""\
+            OUTPUTS:
+              package_fullname:     {fullname}
+              package_directory:    {directory}
+              mypy_prepare_command: {mypy_prepare_command}
+          """))
+
           github_output = Path(getenv("GITHUB_OUTPUT"))
           print(f"GITHUB_OUTPUT: {github_output}")
           with github_output.open("a+", encoding="utf-8") as f:
@@ -234,4 +247,11 @@ jobs:
               coverage_report_json={coverageJSONFile.as_posix()}
             """))
 
-          print(f"DEBUG:\n  unittest xml:        {unittestXMLFile}\n  merged unittest xml: {mergedUnittestXMLFile}\n  coverage html:       {coverageHTMLDirectory}\n  coverage xml:        {coverageXMLFile}\n  coverage json:       {coverageJSONFile}")
+          print(dedent(f"""\
+            DEBUG:
+              unittest xml:        {unittestXMLFile}
+              merged unittest xml: {mergedUnittestXMLFile}
+              coverage html:       {coverageHTMLDirectory}
+              coverage xml:        {coverageXMLFile}
+              coverage json:       {coverageJSONFile}
+          """))

.github/workflows/InstallPackage.yml

@@ -0,0 +1,130 @@
+# ==================================================================================================================== #
+# Authors:                                                                                                             #
+#   Patrick Lehmann                                                                                                    #
+#                                                                                                                      #
+# ==================================================================================================================== #
+# Copyright 2025-2025 The pyTooling Authors                                                                            #
+#                                                                                                                      #
+# Licensed under the Apache License, Version 2.0 (the "License");                                                      #
+# you may not use this file except in compliance with the License.                                                     #
+# You may obtain a copy of the License at                                                                              #
+#                                                                                                                      #
+#   http://www.apache.org/licenses/LICENSE-2.0                                                                         #
+#                                                                                                                      #
+# Unless required by applicable law or agreed to in writing, software                                                  #
+# distributed under the License is distributed on an "AS IS" BASIS,                                                    #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.                                             #
+# See the License for the specific language governing permissions and                                                  #
+# limitations under the License.                                                                                       #
+#                                                                                                                      #
+# SPDX-License-Identifier: Apache-2.0                                                                                  #
+# ==================================================================================================================== #
+name: Install Package
+
+on:
+  workflow_call:
+    inputs:
+      jobs:
+        description: 'JSON list with environment fields, telling the system and Python versions to run tests with.'
+        required: true
+        type: string
+      wheel:
+        description: "Wheel package as input artifact."
+        required: true
+        type: string
+      package_name:
+        description: "Name of the Python package."
+        required: true
+        type: string
+
+jobs:
+  PackageInstallation:
+    name: ${{ matrix.sysicon }} ${{ matrix.pyicon }} Package installation using Python ${{ matrix.python }}
+    runs-on: ${{ matrix.runs-on }}
+
+    strategy:
+      fail-fast: false
+      matrix:
+        include: ${{ fromJson(inputs.jobs) }}
+
+    defaults:
+      run:
+        shell: ${{ matrix.shell }}
+
+    steps:
+      - name: 📥 Download artifacts '${{ inputs.wheel }}' from 'Package' job
+        uses: pyTooling/download-artifact@v4
+        with:
+          name: ${{ inputs.wheel }}
+          path: install
+
+      - name: '🟦 Setup MSYS2 for ${{ matrix.runtime }}'
+        uses: msys2/setup-msys2@v2
+        if: matrix.system == 'msys2'
+        with:
+          msystem: ${{ matrix.runtime }}
+          update: true
+          pacboy: >-
+            python-pip:p python-wheel:p
+            python-lxml:p
+            python-markupsafe:p
+            python-pyaml:p python-types-pyyaml:p
+            python-ruamel-yaml:p python-ruamel.yaml.clib:p
+            python-tomli:p
+
+      - name: 🐍 Setup Python ${{ matrix.python }}
+        uses: actions/setup-python@v5
+        if: matrix.system != 'msys2'
+        with:
+          python-version: ${{ matrix.python }}
+
+      - name: 🔧 Install wheel and pip dependencies (native)
+        if: matrix.system != 'msys2'
+        run: |
+          python -m pip install --disable-pip-version-check -U wheel
+
+      - name: 🔧 Install wheel from artifact (Ubuntu/macOS)
+        if: matrix.system != 'windows'
+        run: |
+          python -m pip install --disable-pip-version-check -U install/*.whl
+
+      - name: 🔧 Install wheel from artifact (Windows)
+        if: matrix.system == 'windows'
+        run: |
+          python -m pip install -v --disable-pip-version-check (Get-Item .\install\*.whl).FullName
+
+      - name: 📦 Run application tests (Ubuntu/macOS)
+        if: matrix.system != 'windows'
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          printf "Import package and checking package version ...\n  "
+          python3 - << EOF | tee ImportTest.log | grep -E "^Package version:\s+[0-9]+\.[0-9]+\.[0-9]+"
+          from ${{ inputs.package_name }} import __version__
+
+          print(f"Package version: {__version__}")
+          EOF
+          if [[ $? -eq 0 ]]; then
+            printf "  ${ANSI_LIGHT_GREEN}[PASSED]${ANSI_NOCOLOR}\n"
+          else
+            printf "  ${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+            printf "::error title=%s::%s\n" "InstallPackage" "Couldn't check package version of '${{ inputs.package_name }}'."
+            exit 1
+          fi
+
+      - name: 📦 Run application tests (Windows)
+        if: matrix.system == 'windows'
+        run: |
+          $result=$(python -c "from ${{ inputs.package_name }} import __version__; print(f""Package version: {__version__}"")")
+          Write-Host $result
+          if ($result -match "Package version:\s+\d+\.\d+\.\d+") {
+            Write-Host -ForegroundColor Green "[PASSED]"
+          } else {
+            Write-Host -ForegroundColor Red "[FAILED]"
+            Write-Host ("::error title={0}::{1}" -f "InstallPackage", "Couldn't check package version of '${{ inputs.package_name }}'.")
+            exit 1
+          }

.github/workflows/IntermediateCleanUp.yml

@@ -3,7 +3,7 @@
 #   Patrick Lehmann                                                                                                    #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

.github/workflows/LaTeXDocumentation.yml

@@ -3,7 +3,7 @@
 #   Patrick Lehmann                                                                                                    #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

.github/workflows/NightlyRelease.yml

@@ -3,7 +3,7 @@
 #   Patrick Lehmann                                                                                                    #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -130,7 +130,7 @@ jobs:
           else
             printf "%s\n" "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}"
             printf "  %s\n" "${ANSI_LIGHT_RED}Couldn't delete release '${{ inputs.nightly_name }}' -> Error: '${message}'.${ANSI_NOCOLOR}"
-            printf "%s\n" "::error title=InternalError::Couldn't delete release '${{ inputs.nightly_name }}' -> Error: '${message}'."
+            printf "::error title=%s::%s\n" "InternalError" "Couldn't delete release '${{ inputs.nightly_name }}' -> Error: '${message}'."
             exit 1
           fi
 
@@ -190,7 +190,7 @@ jobs:
           else
             printf "%s\n" "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}"
             printf "  %s\n" "${ANSI_LIGHT_RED}Couldn't create release '${{ inputs.nightly_name }}' -> Error: '${message}'.${ANSI_NOCOLOR}"
-            printf "%s\n" "::error title=InternalError::Couldn't create release '${{ inputs.nightly_name }}' -> Error: '${message}'."
+            printf "::error title=%s::%s\n" "InternalError" "Couldn't create release '${{ inputs.nightly_name }}' -> Error: '${message}'."
             exit 1
           fi
 
@@ -289,7 +289,7 @@ jobs:
             printf "  %s" "Checked asset for duplicates ... "
             if [[ -n "${assetFilenames[$asset]}" ]]; then
               printf "%s\n" "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
-              printf "%s\n" "::error title=DuplicateAsset::Asset '${asset}' from artifact '${artifact}' was already uploaded to release '${{ inputs.nightly_name }}'."
+              printf "::error title=%s::%s\n" "DuplicateAsset" "Asset '${asset}' from artifact '${artifact}' was already uploaded to release '${{ inputs.nightly_name }}'."
               ERRORS=$((ERRORS + 1))
               continue
             else
@@ -309,7 +309,7 @@ jobs:
               else
                 printf "%s\n" "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
                 printf "      %s\n" "${ANSI_LIGHT_RED}Couldn't download artifact '${artifact}'.${ANSI_NOCOLOR}"
-                printf "%s\n" "::error title=ArtifactNotFound::Couldn't download artifact '${artifact}'."
+                printf "::error title=%s::%s\n" "ArtifactNotFound" "Couldn't download artifact '${artifact}'."
                 ERRORS=$((ERRORS + 1))
                 continue
               fi
@@ -361,7 +361,7 @@ jobs:
               else
                 printf "    %s\n" "Compression ${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
                 printf "      %s\n" "${ANSI_LIGHT_RED}Couldn't compress '${artifact}' to zip file '${asset}'.${ANSI_NOCOLOR}"
-                printf "%s\n" "::error title=CompressionError::Couldn't compress '${artifact}' to zip file '${asset}'."
+                printf "::error title=%s::%s\n" "CompressionError" "Couldn't compress '${artifact}' to zip file '${asset}'."
                 ERRORS=$((ERRORS + 1))
                 continue
               fi
@@ -390,7 +390,7 @@ jobs:
               else
                 printf "    %s\n" "Compression ${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
                 printf "      %s\n" "${ANSI_LIGHT_RED}Couldn't compress '${artifact}' to tgz file '${asset}'.${ANSI_NOCOLOR}"
-                printf "%s\n" "::error title=CompressionError::Couldn't compress '${artifact}' to tgz file '${asset}'."
+                printf "::error title=%s::%s\n" "CompressionError" "Couldn't compress '${artifact}' to tgz file '${asset}'."
                 ERRORS=$((ERRORS + 1))
                 continue
               fi
@@ -419,7 +419,7 @@ jobs:
               else
                 printf "    %s\n" "Compression ${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
                 printf "      %s\n" "${ANSI_LIGHT_RED}Couldn't compress '${artifact}' to zst file '${asset}'.${ANSI_NOCOLOR}"
-                printf "%s\n" "::error title=CompressionError::Couldn't compress '${artifact}' to zst file '${asset}'."
+                printf "::error title=%s::%s\n" "CompressionError" "Couldn't compress '${artifact}' to zst file '${asset}'."
                 ERRORS=$((ERRORS + 1))
                 continue
               fi
@@ -429,7 +429,7 @@ jobs:
             else
               printf "%s\n" "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
               printf "    %s\n" "${ANSI_LIGHT_RED}Couldn't find asset '${asset}' in artifact '${artifact}'.${ANSI_NOCOLOR}"
-              printf "%s\n" "::error title=FileNotFound::Couldn't find asset '${asset}' in artifact '${artifact}'."
+              printf "::error title=%s::%s\n" "FileNotFound" "Couldn't find asset '${asset}' in artifact '${artifact}'."
               ERRORS=$((ERRORS + 1))
               continue
             fi
@@ -469,7 +469,7 @@ jobs:
             else
               printf "%s\n" "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
               printf "    %s\n" "${ANSI_LIGHT_RED}Couldn't upload asset '${asset}' from '${uploadFile}' to release '${{ inputs.nightly_name }}'.${ANSI_NOCOLOR}"
-              printf "%s\n" "::error title=UploadError::Couldn't upload asset '${asset}' from '${uploadFile}' to release '${{ inputs.nightly_name }}'."
+              printf "::error title=%s::%s\n" "UploadError" "Couldn't upload asset '${asset}' from '${uploadFile}' to release '${{ inputs.nightly_name }}'."
               ERRORS=$((ERRORS + 1))
               continue
             fi
@@ -492,7 +492,7 @@ jobs:
             else
               printf "%s\n" "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
               printf "    %s\n" "${ANSI_LIGHT_RED}Couldn't upload asset '${{ inputs.inventory-json }}' to release '${{ inputs.nightly_name }}'.${ANSI_NOCOLOR}"
-              printf "%s\n" "::error title=UploadError::Couldn't upload asset '${{ inputs.inventory-json }}' to release '${{ inputs.nightly_name }}'."
+              printf "::error title=%s::%s\n" "UploadError" "Couldn't upload asset '${{ inputs.inventory-json }}' to release '${{ inputs.nightly_name }}'."
               ERRORS=$((ERRORS + 1))
               continue
             fi
@@ -526,5 +526,5 @@ jobs:
           else
             printf "%s\n" "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}"
             printf "  %s\n" "${ANSI_LIGHT_RED}Couldn't remove draft-state from release '${{ inputs.nightly_name }}'.${ANSI_NOCOLOR}"
-            printf "%s\n" "::error title=ReleasePage::Couldn't remove draft-state from release '${{ inputs.nightly_name }}'."
+            printf "::error title=%s::%s\n" "ReleasePage" "Couldn't remove draft-state from release '${{ inputs.nightly_name }}'."
           fi

.github/workflows/Package.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

.github/workflows/Parameters.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -95,6 +95,11 @@ on:
         required: false
         default: 'macos-14'
         type: string
+      pipeline-delay:
+        description: 'Slow down this job, to delay the startup of the GitHub Action pipline.'
+        required: false
+        default: 0
+        type: number
 
     outputs:
       python_version:
@@ -121,6 +126,12 @@ jobs:
       params:           ${{ steps.params.outputs.params }}
 
     steps:
+      - name: Generate a startup delay of ${{ inputs.pipeline-delay }} seconds
+        id: delay
+        if: inputs.pipeline-delay >= 0
+        run: |
+          sleep ${{ inputs.pipeline-delay }}
+
       - name: Generate 'params' and 'python_jobs'
         id: params
         shell: python

.github/workflows/PrepareJob.yml

@@ -0,0 +1,334 @@
+name: Prepare Variables
+
+on:
+  workflow_call:
+    inputs:
+      ubuntu_image:
+        description: 'Name of the Ubuntu image.'
+        required: false
+        default: 'ubuntu-24.04'
+        type: string
+      main_branch:
+        description: 'Name of the branch containing releases.'
+        required: false
+        default: 'main'
+        type: string
+      development_branch:
+        description: 'Name of the development branch containing features.'
+        required: false
+        default: 'dev'
+        type: string
+      release_branch:
+        description: 'Name of the branch containing releases and nightly builds.'
+        required: false
+        default: 'main'
+        type: string
+      nightly_tag_pattern:
+        description: 'Pattern for nightly tags on the release branch.'
+        required: false
+        default: 'nightly'
+        type: string
+      release_tag_pattern:
+        description: 'Pattern for release tags on the release branch. Usually: vXX.YY.ZZ'
+        required: false
+        default: '(v|r)?[0-9]+(\.[0-9]+){0,2}(-(dev|alpha|beta|rc)([0-9]*))?'
+        type: string
+
+    outputs:
+      on_main_branch:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.on_main_branch }}
+      on_dev_branch:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.on_dev_branch }}
+      on_release_branch:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.on_release_branch }}
+      is_regular_commit:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.is_regular_commit }}
+      is_merge_commit:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.is_merge_commit }}
+      is_release_commit:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.is_release_commit }}
+      is_nightly_tag:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.is_nightly_tag }}
+      is_release_tag:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.is_release_tag }}
+      ref_kind:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.ref_kind }}
+      branch:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.branch }}
+      tag:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.tag }}
+      version:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.version }}
+      pr_title:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.pr_title }}
+      pr_number:
+        description: ""
+        value: ${{ jobs.Prepare.outputs.pr_number }}
+#      pr_mergedby:
+#        description: ""
+#        value: ${{ jobs.Prepare.outputs.pr_mergedby }}
+#      pr_mergedat:
+#        description: ""
+#        value: ${{ jobs.Prepare.outputs.pr_mergedat }}
+
+jobs:
+  Prepare:
+    name: Extract Information
+    runs-on: ubuntu-24.04
+    outputs:
+      on_main_branch:    ${{ steps.Classify.outputs.on_main_branch }}
+      on_dev_branch:     ${{ steps.Classify.outputs.on_dev_branch }}
+      on_release_branch: ${{ steps.Classify.outputs.on_release_branch }}
+      is_regular_commit: ${{ steps.Classify.outputs.is_regular_commit }}
+      is_merge_commit:   ${{ steps.Classify.outputs.is_merge_commit }}
+      is_release_commit: ${{ steps.Classify.outputs.is_release_commit }}
+      is_nightly_tag:    ${{ steps.Classify.outputs.is_nightly_tag }}
+      is_release_tag:    ${{ steps.Classify.outputs.is_release_tag }}
+      ref_kind:          ${{ steps.Classify.outputs.ref_kind }}
+      branch:            ${{ steps.Classify.outputs.branch }}
+      tag:               ${{ steps.Classify.outputs.tag }}
+      version:           ${{ steps.Classify.outputs.version || steps.FindPullRequest.outputs.pr_version }}
+#      release_version:   ${{ steps.FindPullRequest.outputs.release_version }}
+      pr_title:          ${{ steps.FindPullRequest.outputs.pr_title }}
+      pr_number:         ${{ steps.FindPullRequest.outputs.pr_number }}
+
+    steps:
+      - name: ⏬ Checkout repository
+        uses: actions/checkout@v4
+        with:
+          # The command 'git describe' (used for version) needs the history.
+          fetch-depth: 0
+
+      - name: 🖉 GitHub context information
+        run: |
+          printf "%s\n" "github.event_name: ${{ github.event_name }}"
+          printf "%s\n" "github.actor:      ${{ github.actor }}"
+          printf "%s\n" "github.ref:        ${{ github.ref }}"
+          printf "%s\n" "github.base_ref:   ${{ github.base_ref }}"
+          printf "%s\n" "github.head_ref:   ${{ github.head_ref }}"
+          printf "%s\n" "github.sha:        ${{ github.sha }}"
+
+      - name: 🖉 Classify commit
+        id: Classify
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_LIGHT_YELLOW=$'\x1b[93m'
+          ANSI_LIGHT_BLUE=$'\x1b[94m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          ref="${{ github.ref }}"
+          on_main_branch="false"
+          on_dev_branch="false"
+          on_release_branch="false"
+          is_regular_commit="false"
+          is_merge_commit="false"
+          is_release_commit="false"
+          is_nightly_tag="false"
+          is_release_tag="false"
+          ref_kind="unknown"
+          branch=""
+          tag=""
+          version=""
+
+          if [[ "${ref:0:11}" == "refs/heads/" ]]; then
+            ref_kind="branch"
+            branch="${ref:11}"
+
+            printf "Commit check:\n"
+
+            if [[ "${branch}" == "${{ inputs.main_branch }}" ]]; then
+              on_main_branch="true"
+
+              if [[ -z "$(git rev-list -1 --merges ${{ github.sha }}~1..${{ github.sha }})" ]]; then
+                is_regular_commit="true"
+                printf "  ${ANSI_LIGHT_YELLOW}regular "
+              else
+                is_merge_commit="true"
+                printf "  ${ANSI_LIGHT_GREEN}merge "
+              fi
+              printf "commit${ANSI_NOCOLOR} on main branch ${ANSI_LIGHT_BLUE}'%s'${ANSI_NOCOLOR}\n" "${{ inputs.main_branch }}"
+            fi
+
+            if [[ "${branch}" == "${{ inputs.development_branch }}" ]]; then
+              on_dev_branch="true"
+
+              if [[ -z "$(git rev-list -1 --merges ${{ github.sha }}~1..${{ github.sha }})" ]]; then
+                is_regular_commit="true"
+                printf "  ${ANSI_LIGHT_YELLOW}regular "
+              else
+                is_merge_commit="true"
+                printf "  ${ANSI_LIGHT_GREEN}merge "
+              fi
+              printf "commit${ANSI_NOCOLOR} on development branch ${ANSI_LIGHT_BLUE}'%s'${ANSI_NOCOLOR}\n" "${{ inputs.development_branch }}"
+            fi
+
+            if [[ "${branch}" == "${{ inputs.release_branch }}" ]]; then
+              on_release_branch="true"
+
+              if [[ -z "$(git rev-list -1 --merges ${{ github.sha }}~1..${{ github.sha }})" ]]; then
+                is_regular_commit="true"
+                printf "  ${ANSI_LIGHT_YELLOW}regular "
+              else
+                is_release_commit="true"
+                printf "  ${ANSI_LIGHT_GREEN}release "
+              fi
+              printf "commit${ANSI_NOCOLOR} on release branch ${ANSI_LIGHT_BLUE}'%s'${ANSI_NOCOLOR}\n" "${{ inputs.release_branch }}"
+            fi
+          elif [[ "${ref:0:10}" == "refs/tags/" ]]; then
+            ref_kind="tag"
+            tag="${ref:10}"
+
+            printf "Tag check:\n"
+
+            printf "  Check if tag is on release branch '%s' ... " "${{ inputs.release_branch }}"
+            git branch --remotes --contains $(git rev-parse --verify "tags/${tag}~0") | grep "origin/${{ inputs.release_branch }}" > /dev/null
+            if [[ $? -eq 0 ]]; then
+              printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+            else
+              printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+              printf "${ANSI_LIGHT_RED}Tag '%s' isn't on branch '%s'.${ANSI_NOCOLOR}\n" "${tag}" "${{ inputs.release_branch }}"
+              printf "::error title=TagCheck::Tag '%s' isn't on branch '%s'.\n" "${tag}" "${{ inputs.release_branch }}"
+              exit 1
+            fi
+
+            NIGHTLY_TAG_PATTERN='^${{ inputs.nightly_tag_pattern }}$'
+            RELEASE_TAG_PATTERN='^${{ inputs.release_tag_pattern }}$'
+            printf "  Check tag name against regexp '%s' ... " "${RELEASE_TAG_PATTERN}"
+            if [[ "${tag}" =~ NIGHTLY_TAG_PATTERN ]]; then
+              printf "${ANSI_LIGHT_GREEN}[NIGHTLY]${ANSI_NOCOLOR}\n"
+              is_nightly_tag="true"
+            elif [[ "${tag}" =~ $RELEASE_TAG_PATTERN ]]; then
+              printf "${ANSI_LIGHT_GREEN}[RELEASE]${ANSI_NOCOLOR}\n"
+              version="${tag}"
+              is_release_tag="true"
+            else
+              printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+              printf "${ANSI_LIGHT_RED}Tag name '%s' doesn't conform to regexp${ANSI_NOCOLOR}\n" "${tag}"
+              printf "  ${ANSI_LIGHT_RED}nightly tag: %s${ANSI_NOCOLOR}\n" "${NIGHTLY_TAG_PATTERN}"
+              printf "  ${ANSI_LIGHT_RED}release tag: %s${ANSI_NOCOLOR}\n" "${RELEASE_TAG_PATTERN}"
+              printf "::error title=RexExpCheck::Tag name '%s' doesn't conform to regexp '%s' nor '%s'.\n" "${tag}" "${NIGHTLY_TAG_PATTERN}" "${RELEASE_TAG_PATTERN}"
+              exit 1
+            fi
+          else
+            printf "${ANSI_LIGHT_RED}Unknown Git reference '%s'.${ANSI_NOCOLOR}\n" "${{ github.ref }}"
+            printf "::error title=Classify Commit::Unknown Git reference '%s'.\n" "${{ github.ref }}"
+            exit 1
+          fi
+
+          tee --append "${GITHUB_OUTPUT}" <<EOF
+          on_main_branch=${on_main_branch}
+          on_dev_branch=${on_dev_branch}
+          on_release_branch=${on_release_branch}
+          is_regular_commit=${is_regular_commit}
+          is_merge_commit=${is_merge_commit}
+          is_release_commit=${is_release_commit}
+          is_nightly_tag=${is_nightly_tag}
+          is_release_tag=${is_release_tag}
+          ref_kind=${ref_kind}
+          branch=${branch}
+          tag=${tag}
+          version=${version}
+          EOF
+
+      - name: 🔁 Find merged PullRequest from second parent of current SHA (${{ github.sha }})
+        id: FindPullRequest
+        if: steps.Classify.outputs.is_merge_commit == 'true'
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_LIGHT_YELLOW=$'\x1b[93m'
+          ANSI_LIGHT_BLUE=$'\x1b[94m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          export GH_TOKEN=${{ github.token }}
+
+          printf "Read second parent of current SHA (%s) ... " "${{ github.ref }}"
+          FATHER_SHA=$(git rev-parse ${{ github.ref }}^2)
+          if [[ $? -ne 0 || "{FATHER_SHA}" == "" ]]; then
+            printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+            printf "${ANSI_LIGHT_RED}Couldn't read second parent (father) of '%s'.${ANSI_NOCOLOR}\n" "${{ github.ref }}^2"
+            printf "::error title=GitCommitHistoryError::Couldn't read second parent (father) of '%s'. -> %s\n" "${{ github.ref }}^2" "${FATHER_SHA}"
+            exit 1
+          else
+            printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+          fi
+
+          printf "Search Pull Request to '%s' and branch containing SHA %s ... " "${{ inputs.release_branch }}" "${FATHER_SHA}"
+          PULL_REQUESTS=$(gh pr list --base "${{ inputs.release_branch }}" --search "${FATHER_SHA}" --state "merged" --json "title,number,mergedBy,mergedAt")
+          if [[ $? -ne 0 || "${PULL_REQUESTS}" == "" ]]; then
+            printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+            printf "${ANSI_LIGHT_RED}Couldn't find a merged Pull Request to '%s'. -> %s${ANSI_NOCOLOR}\n" "${{ inputs.release_branch }}" "${PULL_REQUESTS}"
+            printf "::error title=PullRequest::Couldn't find a merged Pull Request to '%s'. -> %s\n" "${{ inputs.release_branch }}" "${PULL_REQUESTS}"
+            exit 1
+          else
+            printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+
+            PR_TITLE="$(    printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].title")"
+            PR_NUMBER="$(   printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].number")"
+            PR_MERGED_BY="$(printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].mergedBy.login")"
+            PR_MERGED_AT="$(printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].mergedAt")"
+
+            printf "${ANSI_LIGHT_BLUE}Found Pull Request:${ANSI_NOCOLOR}\n"
+            printf "  %s\n" "Title:    ${PR_TITLE}"
+            printf "  %s\n" "Number:   ${PR_NUMBER}"
+            printf "  %s\n" "MergedBy: ${PR_MERGED_BY}"
+            printf "  %s\n" "MergedAt: ${PR_MERGED_AT} ($(date -d"${PR_MERGED_AT}" '+%d.%m.%Y - %H:%M:%S'))"
+          fi
+
+          RELEASE_TAG_PATTERN='^${{ inputs.release_tag_pattern }}$'
+          printf "Check Pull Request title against regexp '%s' ... " "${RELEASE_TAG_PATTERN}"
+          if [[ "${PR_TITLE}" =~ $RELEASE_TAG_PATTERN ]]; then
+            printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+            RELEASE_VERSION="${PR_TITLE}"
+          else
+            printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+            printf "${ANSI_LIGHT_RED}Pull Request title '%s' doesn't conform to regexp '%s'.${ANSI_NOCOLOR}\n" "${PR_TITLE}" "${RELEASE_TAG_PATTERN}"
+            printf "::error title=RexExpCheck::Pull Request title '%s' doesn't conform to regexp '%s'.\n" "${PR_TITLE}" "${RELEASE_TAG_PATTERN}"
+            exit 1
+          fi
+
+          printf "Release tag: ${ANSI_LIGHT_GREEN}%s${ANSI_NOCOLOR}\n" "${RELEASE_VERSION}"
+          tee --append "${GITHUB_OUTPUT}" <<EOF
+          pr_version=${RELEASE_VERSION}
+          pr_title=${PR_TITLE}
+          pr_number=${PR_NUMBER}
+          pr_mergedby=${PR_MERGED_BY}
+          pr_mergedat=${PR_MERGED_AT}
+          EOF
+
+      - name: Debug
+        run: |
+          printf "on_main_branch:    %s\n" "${{ steps.Classify.outputs.on_main_branch }}"
+          printf "on_dev_branch:     %s\n" "${{ steps.Classify.outputs.on_dev_branch }}"
+          printf "on_release_branch: %s\n" "${{ steps.Classify.outputs.on_release_branch }}"
+          printf "is_regular_commit: %s\n" "${{ steps.Classify.outputs.is_regular_commit }}"
+          printf "is_merge_commit:   %s\n" "${{ steps.Classify.outputs.is_merge_commit }}"
+          printf "is_release_commit: %s\n" "${{ steps.Classify.outputs.is_release_commit }}"
+          printf "is_nightly_tag:    %s\n" "${{ steps.Classify.outputs.is_nightly_tag }}"
+          printf "is_release_tag:    %s\n" "${{ steps.Classify.outputs.is_release_tag }}"
+          printf "ref_kind:          %s\n" "${{ steps.Classify.outputs.ref_kind }}"
+          printf "branch:            %s\n" "${{ steps.Classify.outputs.branch }}"
+          printf "tag:               %s\n" "${{ steps.Classify.outputs.tag }}"
+          printf "version from tag:  %s\n" "${{ steps.Classify.outputs.version }}"
+          printf "version from pr:   %s\n" "${{ steps.FindPullRequest.outputs.pr_version }}"
+          printf "version:           %s\n" "${{ steps.Classify.outputs.version || steps.FindPullRequest.outputs.pr_version }}"
+          printf "pr title:          %s\n" "${{ steps.FindPullRequest.outputs.pr_title }}"
+          printf "pr number:         %s\n" "${{ steps.FindPullRequest.outputs.pr_number }}"

.github/workflows/PublishCoverageResults.yml

@@ -3,7 +3,7 @@
 #   Patrick Lehmann                                                                                                    #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -86,20 +86,20 @@ on:
       codecov:
         description: 'Publish merged coverage report to Codecov.'
         required: false
-        default: false
+        default: 'false'
-        type: boolean
+        type: string
       codacy:
         description: 'Publish merged coverage report to Codacy.'
         required: false
-        default: false
+        default: 'false'
-        type: boolean
+        type: string
     secrets:
       CODECOV_TOKEN:
         description: 'Token to push result to Codecov.'
-        required: true
+        required: false
       CODACY_TOKEN:
         description: 'Token to push result to Codacy.'
-        required: true
+        required: false
 
 jobs:
   PublishCoverageResults:
@@ -200,7 +200,8 @@ jobs:
 
       - name: 📊 Publish code coverage at CodeCov
         uses: codecov/codecov-action@v5
-        if: inputs.codecov
+        id: codecov
+        if: inputs.codecov == 'true'
         continue-on-error: true
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
@@ -212,8 +213,22 @@ jobs:
 
       - name: 📉 Publish code coverage at Codacy
         uses: codacy/codacy-coverage-reporter-action@v1
-        if: inputs.codacy
+        id: codacy
+        if: inputs.codacy == 'true'
         continue-on-error: true
         with:
           project-token: ${{ secrets.CODACY_TOKEN }}
           coverage-reports: ${{ inputs.coverage_report_xml_directory }}/${{ inputs.coverage_report_xml_filename }}
+
+      - name: Generate error messages
+        run: |
+          if [[ "${{ steps.codecov.outcome }}" == "failure" ]]; then
+            printf "::error title=%s::%s\n" "Publish Code Coverage Results / Codecov" "Failed to publish code coverage results."
+          else
+            printf "Codecov: No errors to report.\n"
+          fi
+          if [[ "${{ steps.codacy.outcome }}" == "failure" ]]; then
+            printf "::error title=%s::%s\n" "Publish Code Coverage Results / Codacy" "Failed to publish code coverage results."
+          else
+            printf "Codacy:  No errors to report.\n"
+          fi

.github/workflows/PublishOnPyPI.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -50,7 +50,6 @@ on:
         required: false
 
 jobs:
-
   PublishOnPyPI:
     name: 🚀 Publish to PyPI
     runs-on: "ubuntu-${{ inputs.ubuntu_image_version }}"

.github/workflows/PublishReleaseNotes.yml

@@ -0,0 +1,801 @@
+# ==================================================================================================================== #
+# Authors:                                                                                                             #
+#   Patrick Lehmann                                                                                                    #
+#                                                                                                                      #
+# ==================================================================================================================== #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
+#                                                                                                                      #
+# Licensed under the Apache License, Version 2.0 (the "License");                                                      #
+# you may not use this file except in compliance with the License.                                                     #
+# You may obtain a copy of the License at                                                                              #
+#                                                                                                                      #
+#   http://www.apache.org/licenses/LICENSE-2.0                                                                         #
+#                                                                                                                      #
+# Unless required by applicable law or agreed to in writing, software                                                  #
+# distributed under the License is distributed on an "AS IS" BASIS,                                                    #
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.                                             #
+# See the License for the specific language governing permissions and                                                  #
+# limitations under the License.                                                                                       #
+#                                                                                                                      #
+# SPDX-License-Identifier: Apache-2.0                                                                                  #
+# ==================================================================================================================== #
+name: Release
+
+on:
+  workflow_call:
+    inputs:
+      ubuntu_image:
+        description: 'Name of the Ubuntu image.'
+        required: false
+        default: 'ubuntu-24.04'
+        type: string
+      release_branch:
+        description: 'Name of the branch containing releases.'
+        required: false
+        default: 'main'
+        type: string
+      mode:
+        description: 'Release mode: nightly or release.'
+        required: false
+        default: 'release'
+        type: string
+      tag:
+        description: 'Name of the release (tag).'
+        required: false
+        default: ''
+        type: string
+      title:
+        description: 'Title of the release.'
+        required: false
+        default: ''
+        type: string
+      description:
+        description: 'Multi-line description of the release.'
+        required: false
+        default: ''
+        type: string
+      description_file:
+        description: 'Description of the release from a Markdown file.'
+        required: false
+        default: ''
+        type: string
+      description_footer:
+        description: 'Footer line(s) in every release.'
+        required: false
+        default: |
+
+          --------
+          Published from [%%gh_workflow_name%%](%%gh_server%%/%%gh_owner_repo%%/actions/runs/%%gh_runid%%) workflow triggered by %%gh_actor%% on %%datetime%%.
+
+          This automatic release was created by [pyTooling/Actions](http://github.com/pyTooling/Actions)::Release.yml
+        type: string
+      draft:
+        description: 'Specify if this is a draft.'
+        required: false
+        default: false
+        type: boolean
+      prerelease:
+        description: 'Specify if this is a pre-release.'
+        required: false
+        default: false
+        type: boolean
+      latest:
+        description: 'Specify if this is the latest release.'
+        required: false
+        default: false
+        type: boolean
+      replacements:
+        description: 'Multi-line string containing search=replace patterns.'
+        required: false
+        default: ''
+        type: string
+      assets:
+        description: 'Multi-line string containing artifact:file:title asset descriptions.'
+        required: false
+        type: string
+        default: ''
+      inventory-json:
+        type: string
+        required: false
+        default: ''
+      inventory-version:
+        type: string
+        required: false
+        default: ''
+      inventory-categories:
+        type: string
+        required: false
+        default: ''
+      tarball-name:
+        type: string
+        required: false
+        default: '__pyTooling_upload_artifact__.tar'
+      can-fail:
+        type: boolean
+        required: false
+        default: false
+    outputs:
+      release-page:
+        description: "URL to the release page."
+        value:       ${{ jobs.Release.outputs.release-page }}
+
+jobs:
+  Release:
+    name: 📝 Create or Update Release Page on GitHub
+    runs-on: ${{ inputs.ubuntu_image }}
+    continue-on-error: ${{ inputs.can-fail }}
+    permissions:
+      contents: write
+      actions:  write
+#      attestations: write
+    outputs:
+      release-page: ${{ steps.removeDraft.outputs.release_page }}
+
+    steps:
+      - name: ⏬ Checkout repository
+        uses: actions/checkout@v4
+        with:
+          # The command 'git describe' (used for version) needs the history.
+          fetch-depth: 0
+
+      - name: 🔧 Install zstd
+        run: sudo apt-get install -y --no-install-recommends zstd
+
+      - name: 📑 Prepare
+        id: prepare
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_LIGHT_YELLOW=$'\x1b[93m'
+          ANSI_LIGHT_BLUE=$'\x1b[94m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          printf "Release mode: ${ANSI_LIGHT_BLUE}%s${ANSI_NOCOLOR}\n" "${{ inputs.mode }}"
+          case "${{ inputs.mode }}" in
+            "release")
+              ;;
+            "nightly")
+              printf "→ Allow deletion and recreation of existing release pages for rolling releases (nightly releases)\n"
+              ;;
+            *)
+              printf "Unknown mode '%s'\n" "${{ inputs.mode }}"
+              printf "::error title=%s::%s\n" "InternalError" "Unknown mode '${{ inputs.mode }}'."
+              exit 1
+          esac
+
+      - name: 📑 Delete (old) Release Page
+        id: deleteReleasePage
+        if: inputs.mode == 'nightly'
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_LIGHT_YELLOW=$'\x1b[93m'
+          ANSI_LIGHT_BLUE=$'\x1b[94m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          export GH_TOKEN=${{ github.token }}
+
+          printf "Deleting release '%s' ... " "${{ inputs.tag }}"
+          message="$(gh release delete ${{ inputs.tag }} --yes 2>&1)"
+          if [[ $? -eq 0 ]]; then
+            printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+          elif [[ "${message}" == "release not found" ]]; then
+            printf "${ANSI_LIGHT_YELLOW}[NOT FOUND]${ANSI_NOCOLOR}\n"
+          else
+            printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+            printf "  ${ANSI_LIGHT_RED}Couldn't delete release '%s' -> Error: '%s'.${ANSI_NOCOLOR}\n" "${{ inputs.tag }}" "${message}"
+            printf "::error title=%s::%s\n" "InternalError" "Couldn't delete release '${{ inputs.tag }}' -> Error: '${message}'."
+            exit 1
+          fi
+
+      - name: 📑 Assemble Release Notes
+        id: createReleaseNotes
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_LIGHT_YELLOW=$'\x1b[93m'
+          ANSI_LIGHT_BLUE=$'\x1b[94m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          export GH_TOKEN=${{ github.token }}
+
+          # Save release description (from parameter in a file)
+          head -c -1 <<'EOF' > __DESCRIPTION__.md
+          ${{ inputs.description }}
+          EOF
+
+          # Save release footer (from parameter in a file)
+          head -c -1 <<'EOF' > __FOOTER__.md
+          ${{ inputs.description_footer }}
+          EOF
+
+          # Download Markdown from PullRequest
+          #  Readout second parent's SHA
+          #  Search PR with that SHA
+          #  Load description of that PR
+          printf "Read second parent of current SHA (%s) ... " "${{ github.ref }}"
+          FATHER_SHA=$(git rev-parse ${{ github.ref }}^2 -- 2> /dev/null)
+          if [[ $? -ne 0 || "{FATHER_SHA}" == "" ]]; then
+            printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+            printf "→ ${ANSI_LIGHT_YELLOW}Skipped readout of pull request description. This is not a merge commit.${ANSI_NOCOLOR}\n"
+          else
+            printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+
+            printf "Search Pull Request to '%s' and branch containing SHA %s ... " "${{ inputs.release_branch }}" "${FATHER_SHA}"
+            PULL_REQUESTS=$(gh pr list --base "${{ inputs.release_branch }}" --search "${FATHER_SHA}" --state "merged" --json "title,number,mergedBy,mergedAt,body")
+            if [[ $? -ne 0 || "${PULL_REQUESTS}" == "" ]]; then
+              printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+              printf "${ANSI_LIGHT_RED}Couldn't find a merged Pull Request to '%s'. -> %s${ANSI_NOCOLOR}\n" "${{ inputs.release_branch }}" "${PULL_REQUESTS}"
+              printf "::error title=PullRequest::Couldn't find a merged Pull Request to '%s'. -> %s\n" "${{ inputs.release_branch }}" "${PULL_REQUESTS}"
+              exit 1
+            else
+              printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+
+              PR_TITLE="$(    printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].title")"
+              PR_NUMBER="$(   printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].number")"
+              PR_BODY="$(     printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].body")"
+              PR_MERGED_BY="$(printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].mergedBy.login")"
+              PR_MERGED_AT="$(printf "%s\n" "${PULL_REQUESTS}" | jq --raw-output ".[0].mergedAt")"
+
+              printf "Found Pull Request:\n"
+              printf "  %s\n" "Title:    ${PR_TITLE}"
+              printf "  %s\n" "Number:   ${PR_NUMBER}"
+              printf "  %s\n" "MergedBy: ${PR_MERGED_BY}"
+              printf "  %s\n" "MergedAt: ${PR_MERGED_AT} ($(date -d"${PR_MERGED_AT}" '+%d.%m.%Y - %H:%M:%S'))"
+            fi
+
+            echo "${PR_BODY}" > __PULLREQUEST__.md
+          fi
+
+          # Check if a release description file should be used and exists.
+          if [[ "${{ inputs.description_file }}" != "" ]]; then
+            if [[ ! -f "${{ inputs.description_file }}" ]]; then
+              printf "${ANSI_LIGHT_RED}Release description file '%s' not found.${ANSI_NOCOLOR}\n" "${{ inputs.description_file }}"
+              printf "::error title=%s::%s\n" "FileNotFound" "Release description file '${{ inputs.description_file }}' not found."
+              exit 1
+            elif [[ -s "${{ inputs.description_file }}" ]]; then
+              printf "Use '%s' as main release description.\n" "${{ inputs.description_file }}"
+              cp -v "${{ inputs.description_file }}" __NOTES__.md
+            else
+              printf "${ANSI_LIGHT_RED}Release description file '%s' is empty.${ANSI_NOCOLOR}\n" "${{ inputs.description_file }}"
+              printf "::error title=%s::%s\n" "FileNotFound" "Release description file '${{ inputs.description_file }}' is empty."
+              exit 1
+            fi
+          # Check if the main release description is provided by a template parameter
+          elif [[ -s __DESCRIPTION__.md ]]; then
+            printf "Use '__DESCRIPTION__.md' as main release description.\n"
+            mv -v __DESCRIPTION__.md __NOTES__.md
+          # Check if the pull request serves as the main release description text.
+          elif [[ -s __PULLREQUEST__.md ]]; then
+            printf "Use '__PULLREQUEST__.md' as main release description.\n"
+            mv -v __PULLREQUEST__.md __NOTES__.md
+
+            printf "Append '%%%%FOOTER%%%%' to '__NOTES__.md'.\n"
+            printf "\n%%%%FOOTER%%%%\n" >> __NOTES__.md
+          else
+            printf "${ANSI_LIGHT_RED}No release description specified (file, parameter, PR text).${ANSI_NOCOLOR}\n"
+            printf "::error title=%s::%s\n" "MissingDescription" "No release description specified (file, parameter, PR text)."
+            exit 1
+          fi
+
+          # Read release notes main file for placeholder substitution
+          NOTES=$(<__NOTES__.md)
+
+          # Inline description
+          if [[ -s __DESCRIPTION__.md ]]; then
+            NOTES="${NOTES//%%DESCRIPTION%%/$(<__DESCRIPTION__.md)}"
+          fi
+
+          # Inline PullRequest and increase headline levels
+          if [[ -s __PULLREQUEST__.md ]]; then
+            while [[ "${NOTES}" =~ %%(PULLREQUEST(\+[0-3])?)%% ]]; do
+              case "${BASH_REMATCH[1]}" in
+                "PULLREQUEST+0" | "PULLREQUEST")
+                  NOTES="${NOTES//${BASH_REMATCH[0]}/$(<__PULLREQUEST__.md)}"
+                  ;;
+                "PULLREQUEST+1")
+                  NOTES="${NOTES//${BASH_REMATCH[0]}/$(cat __PULLREQUEST__.md | sed -E 's/^(#+) /\1# /gm;t')}"
+                  ;;
+                "PULLREQUEST+2")
+                  NOTES="${NOTES//${BASH_REMATCH[0]}/$(cat __PULLREQUEST__.md | sed -E 's/^(#+) /\1### /gm;t')}"
+                  ;;
+                "PULLREQUEST+3")
+                  NOTES="${NOTES//${BASH_REMATCH[0]}/$(cat __PULLREQUEST__.md | sed -E 's/^(#+) /\1### /gm;t')}"
+                  ;;
+              esac
+            done
+          fi
+
+          # inline Footer
+          if [[ -s __FOOTER__.md ]]; then
+            NOTES="${NOTES//%%FOOTER%%/$(<__FOOTER__.md)}"
+          fi
+
+          # Apply replacements
+          while IFS=$'\r\n' read -r patternLine; do
+            # skip empty lines
+            [[ "$patternLine" == "" ]] && continue
+
+            pattern="%${patternLine%%=*}%"
+            replacement="${patternLine#*=}"
+            NOTES="${NOTES//$pattern/$replacement}"
+          done <<<'${{ inputs.replacements }}'
+
+          # Workarounds for stupid GitHub variables
+          owner_repo="${{ github.repository }}"
+          repo=${owner_repo##*/}
+
+          # Replace special identifiers
+          NOTES="${NOTES//%%gh_server%%/${{ github.server_url }}}"
+          NOTES="${NOTES//%%gh_workflow_name%%/${{ github.workflow }}}"
+          NOTES="${NOTES//%%gh_owner%%/${{ github.repository_owner }}}"
+          NOTES="${NOTES//%%gh_repo%%/${repo}}"
+          NOTES="${NOTES//%%gh_owner_repo%%/${{ github.repository_owner }}}"
+          #NOTES="${NOTES//%%gh_pages%%/https://${{ github.repository_owner }}.github.io/${repo}/}"
+          NOTES="${NOTES//%%gh_runid%%/${{ github.run_id }}}"
+          NOTES="${NOTES//%%gh_actor%%/${{ github.actor }}}"
+          NOTES="${NOTES//%%gh_sha%%/${{ github.sha }}}"
+          NOTES="${NOTES//%%date%%/$(date '+%Y-%m-%d')}"
+          NOTES="${NOTES//%%time%%/$(date '+%H:%M:%S %Z')}"
+          NOTES="${NOTES//%%datetime%%/$(date '+%Y-%m-%d %H:%M:%S %Z')}"
+
+          # Write final release notes to file
+          echo "${NOTES}" > __NOTES__.md
+
+          # Display partial contents for debugging
+          if [[ -s __DESCRIPTION__.md ]]; then
+            printf "::group::${ANSI_LIGHT_BLUE}%s${ANSI_NOCOLOR}\n" "Content of '__DESCRIPTION__.md' ($(stat --printf="%s" "__DESCRIPTION__.md") B) ...."
+            cat __DESCRIPTION__.md
+            printf "::endgroup::\n"
+          else
+            printf "${ANSI_LIGHT_YELLOW}No '__DESCRIPTION__.md' found.${ANSI_NOCOLOR}\n"
+          fi
+          if [[ -s __PULLREQUEST__.md ]]; then
+            printf "::group::${ANSI_LIGHT_BLUE}%s${ANSI_NOCOLOR}\n" "Content of '__PULLREQUEST__.md' ($(stat --printf="%s" "__PULLREQUEST__.md") B) ...."
+            cat __PULLREQUEST__.md
+            printf "::endgroup::\n"
+          else
+            printf "${ANSI_LIGHT_YELLOW}No '__PULLREQUEST__.md' found.${ANSI_NOCOLOR}\n"
+          fi
+          if [[ -s __FOOTER__.md ]]; then
+            printf "::group::${ANSI_LIGHT_BLUE}%s${ANSI_NOCOLOR}\n" "Content of '__FOOTER__.md' ($(stat --printf="%s" "__FOOTER__.md") B) ...."
+            cat __FOOTER__.md
+            printf "::endgroup::\n"
+          else
+            printf "${ANSI_LIGHT_YELLOW}No '__FOOTER__.md' found.${ANSI_NOCOLOR}\n"
+          fi
+
+          # Print final release notes
+          printf "::group::${ANSI_LIGHT_BLUE}%s${ANSI_NOCOLOR}\n" "Content of '__NOTES__.md' ($(stat --printf="%s" "__NOTES__.md") B) ...."
+          cat __NOTES__.md
+          printf "::endgroup::\n"
+
+      - name: 📑 Create new Release Page
+        id: createReleasePage
+        if: inputs.mode == 'release'
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_LIGHT_YELLOW=$'\x1b[93m'
+          ANSI_LIGHT_BLUE=$'\x1b[94m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          export GH_TOKEN=${{ github.token }}
+
+          if [[ "${{ inputs.prerelease }}" == "true" ]]; then
+            addPreRelease="--prerelease"
+          fi
+
+          if [[ "${{ inputs.latest }}" == "false" ]]; then
+            addLatest="--latest=false"
+          fi
+
+          if [[ "${{ inputs.title }}" != "" ]]; then
+            addTitle=("--title" "${{ inputs.title }}")
+          fi
+
+          if [[ -s __NOTES__.md ]]; then
+            addNotes=("--notes-file" "__NOTES__.md")
+          fi
+
+          printf "Creating release '%s' ... " "${{ inputs.tag }}"
+          message="$(gh release create "${{ inputs.tag }}" --verify-tag --draft $addPreRelease $addLatest "${addTitle[@]}" "${addNotes[@]}" 2>&1)"
+          if [[ $? -eq 0 ]]; then
+            printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+            printf "  Release page: %s\n" "${message}"
+          else
+            printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+            printf "  ${ANSI_LIGHT_RED}Couldn't create release '%s' -> Error: '%s'.${ANSI_NOCOLOR}\n" "${{ inputs.tag }}" "${message}"
+            printf "::error title=%s::%s\n" "InternalError" "Couldn't create release '${{ inputs.tag }}' -> Error: '${message}'."
+            exit 1
+          fi
+
+      - name: 📑 Recreate Release Page
+        id: recreateReleasePage
+        if: inputs.mode == 'nightly'
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_LIGHT_YELLOW=$'\x1b[93m'
+          ANSI_LIGHT_BLUE=$'\x1b[94m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          export GH_TOKEN=${{ github.token }}
+
+          addDraft="--draft"
+          if [[ "${{ inputs.prerelease }}" == "true" ]]; then
+            addPreRelease="--prerelease"
+          fi
+
+          if [[ "${{ inputs.latest }}" == "false" ]]; then
+            addLatest="--latest=false"
+          fi
+
+          if [[ "${{ inputs.title }}" != "" ]]; then
+            addTitle=("--title" "${{ inputs.title }}")
+          fi
+
+          if [[ -s __NOTES__.md ]]; then
+            addNotes=("--notes-file" "__NOTES__.md")
+          fi
+
+          printf "Creating release '%s' ... " "${{ inputs.tag }}"
+          message="$(gh release create "${{ inputs.tag }}" --verify-tag --draft $addPreRelease $addLatest "${addTitle[@]}" "${addNotes[@]}" 2>&1)"
+          if [[ $? -eq 0 ]]; then
+            printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+            printf "  Release page: %s\n" "${message}"
+          else
+            printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+            printf "  ${ANSI_LIGHT_RED}Couldn't recreate release '%s' -> Error: '%s'.${ANSI_NOCOLOR}\n" "${{ inputs.tag }}" "${message}"
+            printf "::error title=%s::%s\n" "InternalError" "Couldn't recreate release '${{ inputs.tag }}' -> Error: '${message}'."
+            exit 1
+          fi
+
+      - name: 📥 Download artifacts and upload as assets
+        id: uploadAssets
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_LIGHT_YELLOW=$'\x1b[93m'
+          ANSI_LIGHT_BLUE=$'\x1b[94m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          export GH_TOKEN=${{ github.token }}
+
+          Replace() {
+            line="$1"
+            while IFS=$'\r\n' read -r patternLine; do
+              # skip empty lines
+              [[ "$patternLine" == "" ]] && continue
+
+              pattern="${patternLine%%=*}"
+              replacement="${patternLine#*=}"
+              line="${line//"%$pattern%"/"$replacement"}"
+            done <<<'${{ inputs.replacements }}'
+            printf "%s\n" "$line"
+          }
+
+          # Create JSON inventory
+          if [[ "${{ inputs.inventory-json }}" != "" ]]; then
+            VERSION="1.0"
+
+            # Split categories by ',' into a Bash array.
+            # See https://stackoverflow.com/a/45201229/3719459
+            if [[ "${{ inputs.inventory-categories }}" != "" ]]; then
+              readarray -td, inventoryCategories <<<"${{ inputs.inventory-categories }},"
+              unset 'inventoryCategories[-1]'
+              declare -p inventoryCategories
+            else
+              inventoryCategories=""
+            fi
+
+            jsonInventory=$(jq -c -n \
+              --arg version "${VERSION}" \
+              --arg date "$(date +"%Y-%m-%dT%H-%M-%S%:z")" \
+              --argjson jsonMeta "$(jq -c -n \
+                --arg tag "${{ inputs.tag }}" \
+                --arg version "${{ inputs.inventory-version }}" \
+                --arg hash "${{ github.sha }}" \
+                --arg repo "${{ github.server_url }}/${{ github.repository }}" \
+                --arg release "${{ github.server_url }}/${{ github.repository }}/releases/download/${{ inputs.tag }}" \
+                --argjson categories "$(jq -c -n \
+                  '$ARGS.positional' \
+                  --args "${inventoryCategories[@]}" \
+                )" \
+                '{"tag": $tag, "version": $version, "git-hash": $hash, "repository-url": $repo, "release-url": $release, "categories": $categories}' \
+              )" \
+              '{"version": 1.0, "timestamp": $date, "meta": $jsonMeta, "files": {}}'
+            )
+          fi
+
+          ERRORS=0
+          # A dictionary of 0/1 to avoid duplicate downloads
+          declare -A downloadedArtifacts
+          # A dictionary to check for duplicate asset files in release
+          declare -A assetFilenames
+          while IFS=$'\r\n' read -r assetLine; do
+            if [[ "${assetLine}" == "" || "${assetLine:0:1}" == "#" ]]; then
+              continue
+            fi
+
+            # split assetLine colon separated triple: artifact:asset:title
+            artifact="${assetLine%%:*}"
+            assetLine="${assetLine#*:}"
+            asset="${assetLine%%:*}"
+            assetLine="${assetLine#*:}"
+            if [[ "${{ inputs.inventory-json }}" == "" ]]; then
+              categories=""
+              title="${assetLine##*:}"
+            else
+              categories="${assetLine%%:*}"
+              title="${assetLine##*:}"
+            fi
+
+            # remove leading whitespace
+            asset="${asset#"${asset%%[![:space:]]*}"}"
+            categories="${categories#"${categories%%[![:space:]]*}"}"
+            title="${title#"${title%%[![:space:]]*}"}"
+
+            # apply replacements
+            asset="$(Replace "${asset}")"
+            title="$(Replace "${title}")"
+
+            printf "Publish asset '%s' from artifact '%s' with title '%s'\n" "${asset}" "${artifact}" "${title}"
+            printf "  Checked asset for duplicates ... "
+            if [[ -n "${assetFilenames[$asset]}" ]]; then
+              printf "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+              printf "::error title=%s::%s\n" "DuplicateAsset" "Asset '${asset}' from artifact '${artifact}' was already uploaded to release '${{ inputs.tag }}'."
+              ERRORS=$((ERRORS + 1))
+              continue
+            else
+              printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+              assetFilenames[$asset]=1
+            fi
+
+            # Download artifact by artifact name
+            if [[ -n "${downloadedArtifacts[$artifact]}" ]]; then
+              printf "  downloading '%s' ... ${ANSI_LIGHT_YELLOW}[SKIPPED]${ANSI_NOCOLOR}\n" "${artifact}"
+            else
+              echo    "  downloading '${artifact}' ... "
+              printf "    gh run download $GITHUB_RUN_ID --dir \"%s\" --name \"%s\" " "${artifact}" "${artifact}"
+              gh run download $GITHUB_RUN_ID --dir "${artifact}" --name "${artifact}"
+              if [[ $? -eq 0 ]]; then
+                printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+              else
+                printf "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+                printf "      ${ANSI_LIGHT_RED}Couldn't download artifact '%s'.${ANSI_NOCOLOR}\n" "${artifact}"
+                printf "::error title=%s::%s\n" "ArtifactNotFound" "Couldn't download artifact '${artifact}'."
+                ERRORS=$((ERRORS + 1))
+                continue
+              fi
+              downloadedArtifacts[$artifact]=1
+
+              printf "  Checking for embedded tarball ... "
+              if [[ -f "${artifact}/${{ inputs.tarball-name }}" ]]; then
+                printf "${ANSI_LIGHT_GREEN}[FOUND]${ANSI_NOCOLOR}\n"
+
+                pushd "${artifact}" > /dev/null
+
+                printf "    Extracting embedded tarball ... "
+                tar -xf "${{ inputs.tarball-name }}"
+                if [[ $? -ne 0 ]]; then
+                  printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+                else
+                  printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+                fi
+
+                printf "    Removing temporary tarball ... "
+                rm -f "${{ inputs.tarball-name }}"
+                if [[ $? -ne 0 ]]; then
+                  printf "${ANSI_LIGHT_RED}[FAILED]${ANSI_NOCOLOR}\n"
+                else
+                  printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+                fi
+
+                popd > /dev/null
+              else
+                printf "${ANSI_LIGHT_YELLOW}[SKIPPED]${ANSI_NOCOLOR}\n"
+              fi
+            fi
+
+            # Check if artifact should be compressed (zip, tgz) or if asset was part of the downloaded artifact.
+            printf "  checking asset '%s' ... " "${artifact}/${asset}"
+            if [[ "${asset}" == !*.zip ]]; then
+              printf "${ANSI_LIGHT_GREEN}[ZIP]${ANSI_NOCOLOR}\n"
+              asset="${asset##*!}"
+              printf "::group::    %s\n" "Compressing artifact '${artifact}' to '${asset}' ..."
+              (
+                cd "${artifact}" && \
+                zip -r "../${asset}" *
+              )
+              retCode=$?
+              printf "::endgroup::\n"
+              if [[ $retCode -eq 0 ]]; then
+                printf "    Compression ${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+                uploadFile="${asset}"
+              else
+                printf "    Compression ${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+                printf "      ${ANSI_LIGHT_RED}Couldn't compress '%s' to zip file '%s'.${ANSI_NOCOLOR}\n" "${artifact}" "${asset}"
+                printf "::error title=%s::%s\n" "CompressionError" "Couldn't compress '${artifact}' to zip file '${asset}'."
+                ERRORS=$((ERRORS + 1))
+                continue
+              fi
+            elif [[ "${asset}" == !*.tgz || "${asset}" == !*.tar.gz || "${asset}" == \$*.tgz || "${asset}" == \$*.tar.gz ]]; then
+              printf "${ANSI_LIGHT_GREEN}[TAR/GZ]${ANSI_NOCOLOR}\n"
+
+              if [[ "${asset:0:1}" == "\$" ]]; then
+                asset="${asset##*$}"
+                dirName="${asset%.*}"
+                printf "    Compressing artifact '%s' to '%s' ...\n" "${artifact}" "${asset}"
+                tar -c --gzip --owner=0 --group=0 --file="${asset}" --directory="${artifact}" --transform "s|^\.|${dirName%.tar}|" .
+                retCode=$?
+              else
+                asset="${asset##*!}"
+                printf "    Compressing artifact '%s' to '%s' ...\n" "${artifact}" "${asset}"
+                (
+                  cd "${artifact}" && \
+                  tar -c --gzip --owner=0 --group=0 --file="../${asset}" *
+                )
+                retCode=$?
+              fi
+
+              if [[ $retCode -eq 0 ]]; then
+                printf "    Compression ${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+                uploadFile="${asset}"
+              else
+                printf "    Compression ${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+                printf "      ${ANSI_LIGHT_RED}Couldn't compress '%s' to tgz file '%s'.${ANSI_NOCOLOR}\n" "${artifact}" "${asset}"
+                printf "::error title=%s::%s\n" "CompressionError" "Couldn't compress '${artifact}' to tgz file '${asset}'."
+                ERRORS=$((ERRORS + 1))
+                continue
+              fi
+            elif [[ "${asset}" == !*.tzst || "${asset}" == !*.tar.zst || "${asset}" == \$*.tzst || "${asset}" == \$*.tar.zst ]]; then
+              printf "${ANSI_LIGHT_GREEN}[ZST]${ANSI_NOCOLOR}\n"
+
+              if [[ "${asset:0:1}" == "\$" ]]; then
+                asset="${asset##*$}"
+                dirName="${asset%.*}"
+                printf "    Compressing artifact '%s' to '%s' ...\n" "${artifact}" "${asset}"
+                tar -c --zstd --owner=0 --group=0 --file="${asset}" --directory="${artifact}" --transform "s|^\.|${dirName%.tar}|" .
+                retCode=$?
+              else
+                asset="${asset##*!}"
+                printf "    Compressing artifact '%s' to '%s' ...\n" "${artifact}" "${asset}"
+                (
+                  cd "${artifact}" && \
+                  tar -c --zstd --owner=0 --group=0 --file="../${asset}" *
+                )
+                retCode=$?
+              fi
+
+              if [[ $retCode -eq 0 ]]; then
+                printf "    Compression ${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+                uploadFile="${asset}"
+              else
+                printf "    Compression ${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+                printf "      ${ANSI_LIGHT_RED}Couldn't compress '%s' to zst file '%s'.${ANSI_NOCOLOR}\n" "${artifact}" "${asset}"
+                printf "::error title=%s::%s\n" "CompressionError" "Couldn't compress '${artifact}' to zst file '${asset}'."
+                ERRORS=$((ERRORS + 1))
+                continue
+              fi
+            elif [[ -e "${artifact}/${asset}" ]]; then
+              printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+              uploadFile="${artifact}/${asset}"
+            else
+              printf "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+              printf "    ${ANSI_LIGHT_RED}Couldn't find asset '%s' in artifact '%s'.${ANSI_NOCOLOR}\n" "${asset}" "${artifact}"
+              printf "::error title=%s::%s\n" "FileNotFound" "Couldn't find asset '${asset}' in artifact '${artifact}'."
+              ERRORS=$((ERRORS + 1))
+              continue
+            fi
+
+            # Add asset to JSON inventory
+            if [[ "${{ inputs.inventory-json }}" != "" ]]; then
+              if [[ "${categories}" != "${title}" ]]; then
+                printf "  adding file '%s' with '%s' to JSON inventory ...\n" "${uploadFile#*/}" "${categories//;/ → }"
+                category=""
+                jsonEntry=$(jq -c -n \
+                  --arg title "${title}" \
+                  --arg file "${uploadFile#*/}" \
+                  '{"file": $file, "title": $title}' \
+                )
+
+                while [[ "${categories}" != "${category}" ]]; do
+                  category="${categories##*,}"
+                  categories="${categories%,*}"
+                  jsonEntry=$(jq -c -n --arg cat "${category}" --argjson value "${jsonEntry}" '{$cat: $value}')
+                done
+
+                jsonInventory=$(jq -c -n \
+                  --argjson inventory "${jsonInventory}" \
+                  --argjson file "${jsonEntry}" \
+                  '$inventory * {"files": $file}' \
+                )
+              else
+                printf "  adding file '%s' to JSON inventory ... ${ANSI_LIGHT_YELLOW}[SKIPPED]${ANSI_NOCOLOR}\n" "${uploadFile#*/}"
+              fi
+            fi
+
+            # Upload asset to existing release page
+            printf "  uploading asset '%s' from '%s' with title '%s' ... " "${asset}" "${uploadFile}" "${title}"
+            gh release upload ${{ inputs.tag }} "${uploadFile}#${title}" --clobber
+            if [[ $? -eq 0 ]]; then
+              printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+            else
+              printf "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+              printf "    ${ANSI_LIGHT_RED}Couldn't upload asset '%s' from '%s' to release '%s'.${ANSI_NOCOLOR}\n" "${asset}" "${uploadFile}" "${{ inputs.tag }}"
+              printf "::error title=%s::%s\n" "UploadError" "Couldn't upload asset '${asset}' from '${uploadFile}' to release '${{ inputs.tag }}'."
+              ERRORS=$((ERRORS + 1))
+              continue
+            fi
+          done <<<'${{ inputs.assets }}'
+
+          if [[ "${{ inputs.inventory-json }}" != "" ]]; then
+            inventoryTitle="Release Inventory (JSON)"
+
+            printf "Publish asset '%s' with title '%s'\n" "${{ inputs.inventory-json }}" "${inventoryTitle}"
+            printf "::group::${ANSI_LIGHT_BLUE}%s${ANSI_NOCOLOR}\n" "Writing JSON inventory to '${{ inputs.inventory-json }}' ...."
+            printf "%s\n" "$(jq -n --argjson inventory "${jsonInventory}" '$inventory')" > "${{ inputs.inventory-json }}"
+            cat "${{ inputs.inventory-json }}"
+            printf "::endgroup::\n"
+
+            # Upload inventory asset to existing release page
+            printf "  uploading asset '%s' title '%s' ... " "${{ inputs.inventory-json }}" "${inventoryTitle}"
+            gh release upload ${{ inputs.tag }} "${{ inputs.inventory-json }}#${inventoryTitle}" --clobber
+            if [[ $? -eq 0 ]]; then
+              printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+            else
+              printf "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+              printf "    ${ANSI_LIGHT_RED}Couldn't upload asset '%s' to release '%s'.${ANSI_NOCOLOR}\n" "${{ inputs.inventory-json }}" "${{ inputs.tag }}"
+              printf "::error title=%s::%s\n" "UploadError" "Couldn't upload asset '${{ inputs.inventory-json }}' to release '${{ inputs.tag }}'."
+              ERRORS=$((ERRORS + 1))
+              continue
+            fi
+          fi
+
+          printf "::group::${ANSI_LIGHT_BLUE}%s${ANSI_NOCOLOR}\n" "Inspecting downloaded artifacts ..."
+          tree -pash -L 3 .
+          printf "::endgroup::\n"
+
+          if [[ $ERRORS -ne 0 ]]; then
+            printf "${ANSI_LIGHT_RED}%s errors detected in previous steps.${ANSI_NOCOLOR}\n" "${ERRORS}"
+            exit 1
+          fi
+
+      - name: 📑 Remove draft state from Release Page
+        id: removeDraft
+        if: ${{ ! inputs.draft }}
+        run: |
+          set +e
+
+          ANSI_LIGHT_RED=$'\x1b[91m'
+          ANSI_LIGHT_GREEN=$'\x1b[92m'
+          ANSI_NOCOLOR=$'\x1b[0m'
+
+          export GH_TOKEN=${{ github.token }}
+
+          # Remove draft-state from release page
+          printf "Remove draft-state from release '%s' ... " "${title}"
+          releasePage=$(gh release edit --draft=false "${{ inputs.tag }}")
+          if [[ $? -eq 0 ]]; then
+            printf "${ANSI_LIGHT_GREEN}[OK]${ANSI_NOCOLOR}\n"
+            printf "  Release page: %s\n" "${releasePage}"
+
+            printf "release_page=%s\n" "${releasePage}" >> "${GITHUB_OUTPUT}"
+          else
+            printf "${ANSI_LIGHT_RED}[ERROR]${ANSI_NOCOLOR}\n"
+            printf "  ${ANSI_LIGHT_RED}Couldn't remove draft-state from release '%s'.${ANSI_NOCOLOR}\n" "${{ inputs.tag }}"
+            printf "::error title=%s::%s\n" "ReleasePage" "Couldn't remove draft-state from release '${{ inputs.tag }}'."
+          fi

.github/workflows/PublishTestResults.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -57,8 +57,8 @@ on:
       publish:
         description: 'Publish test report summary via Dorny Test-Reporter'
         required: false
-        default: true
+        default: 'true'
-        type: boolean
+        type: string
       report_title:
         description: 'Title of the summary report in the pipeline''s sidebar'
         required: false
@@ -67,17 +67,22 @@ on:
       dorny:
         description: 'Publish merged unittest results via Dorny Test-Reporter.'
         required: false
-        default: true
+        default: 'true'
-        type: boolean
+        type: string
       codecov:
         description: 'Publish merged unittest results to Codecov.'
         required: false
-        default: true
+        default: 'false'
-        type: boolean
+        type: string
+      codecov_flags:
+        description: 'Flags applied to the upload to Codecov'
+        required: false
+        default: 'unittest'
+        type: string
     secrets:
       CODECOV_TOKEN:
         description: 'Token to push result to Codecov.'
-        required: true
+        required: false
 
 jobs:
   PublishTestResults:
@@ -117,7 +122,7 @@ jobs:
 
       - name: 📊 Publish Unit Test Results
         uses: dorny/test-reporter@v2
-        if: (inputs.dorny || inputs.publish) && inputs.report_title != ''
+        if: ( inputs.dorny  == 'true' || inputs.publish  == 'true' ) && inputs.report_title != ''
         with:
           name: ${{ inputs.report_title }}
           path: ${{ inputs.merged_junit_filename }}
@@ -125,13 +130,24 @@ jobs:
 
       - name: 📊 Publish unittest results at CodeCov
         uses: codecov/test-results-action@v1
-        if: inputs.codecov
+        id: codecov
+        if: inputs.codecov == 'true'
+        continue-on-error: true
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
           disable_search: true
           files: ${{ inputs.merged_junit_filename }}
+          flags: ${{ inputs.codecov_flags }}
           fail_ci_if_error: true
 
+      - name: Generate error messages
+        run: |
+          if [[ "${{ steps.codecov.outcome }}" == "failure" ]]; then
+            printf "::error title=%s::%s\n" "Publish Unit Test Results / Codecov" "Failed to publish unittest results."
+          else
+            printf "Codecov: No errors to report.\n"
+          fi
+
       - name: 📤 Upload merged 'JUnit Test Summary' artifact
         uses: pyTooling/upload-artifact@v4
         if: inputs.merged_junit_artifact != ''

.github/workflows/PublishToGitHubPages.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

.github/workflows/SphinxDocumentation.yml

@@ -3,7 +3,7 @@
 #   Patrick Lehmann                                                                                                    #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

.github/workflows/StaticTypeCheck.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

.github/workflows/TagReleaseCommit.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -20,74 +20,65 @@
 #                                                                                                                      #
 # SPDX-License-Identifier: Apache-2.0                                                                                  #
 # ==================================================================================================================== #
-name: Release
+name: Auto Tag
 
 on:
   workflow_call:
     inputs:
-      ubuntu_image_version:
+      ubuntu_image:
-        description: 'Ubuntu image version.'
+        description: 'Name of the Ubuntu image.'
         required: false
-        default: '24.04'
+        default: 'ubuntu-24.04'
+        type: string
+      version:
+        description: 'Version used as tag name.'
+        required: true
+        type: string
+      auto_tag:
+        description: 'Automatically add and push a tag.'
+        required: true
+        type: string
+      workflow:
+        description: 'Workflow to start after adding a tag.'
+        required: false
+        default: 'Pipeline.yml'
         type: string
 
 jobs:
-  Release:
+  AutoTag:
-    name: 📝 Create 'Release Page' on GitHub
+    name: "🏷 Create tag '${{ inputs.version}}' on GitHub"
-    runs-on: "ubuntu-${{ inputs.ubuntu_image_version }}"
+    runs-on: ${{ inputs.ubuntu_image }}
+    if: inputs.auto_tag == 'true'
+
+#    if: github.ref == 'refs/heads/${{ inputs.release_branch }}'
+
+    permissions:
+      contents: write   # required for tag creation
+      actions:  write    # required to start a new pipeline
 
     steps:
-      - name: 🔁 Extract Git tag from GITHUB_REF
+      - name: 🏷 Create release tag '${{ steps.FindPullRequest.outputs.version }}'
-        id: getVariables
+        uses: actions/github-script@v7
-        run: |
+        id: createReleaseTag
-          GIT_TAG=${GITHUB_REF#refs/*/}
+#        if: inputs.auto_tag == 'true'
-          RELEASE_VERSION=${GIT_TAG#v}
-          RELEASE_DATETIME="$(date --utc '+%d.%m.%Y - %H:%M:%S')"
-          # write to step outputs
-          printf "%s\n" "gitTag=${GIT_TAG}" >> $GITHUB_OUTPUT
-          printf "%s\n" "version=${RELEASE_VERSION}" >> $GITHUB_OUTPUT
-          printf "%s\n" "datetime=${RELEASE_DATETIME}" >> $GITHUB_OUTPUT
-
-      - name: 📑 Create Release Page
-        uses: actions/create-release@v1
-        id: createReleasePage
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
         with:
-          tag_name: ${{ steps.getVariables.outputs.gitTag }}
+          script: |
-#          release_name: ${{ steps.getVariables.outputs.gitTag }}
+            github.rest.git.createRef({
-          body: |
+              owner: context.repo.owner,
-            **Automated Release created on: ${{ steps.getVariables.outputs.datetime }}**
+              repo:  context.repo.repo,
+              ref:   'refs/tags/${{ inputs.version }}',
+              sha:   context.sha
+            })
 
-            # New Features
+      - name: Trigger Workflow
-
+        uses: actions/github-script@v7
-            * tbd
+        id: runReleaseTag
-            * tbd
+#        if: inputs.auto_tag == 'true'
-
+        with:
-            # Changes
+          script: |
-
+            github.rest.actions.createWorkflowDispatch({
-            * tbd
+              owner:       context.repo.owner,
-            * tbd
+              repo:        context.repo.repo,
-
+              workflow_id: '${{ inputs.workflow }}',
-            # Bug Fixes
+              ref:         '${{ inputs.version }}'
-
+            })
-            * tbd
-            * tbd
-
-            # Documentation
-
-            * tbd
-            * tbd
-
-            # Unit Tests
-
-            * tbd
-            * tbd
-
-            ----------
-            # Related Issues and Pull-Requests
-
-            * tbd
-            * tbd
-          draft: true
-          prerelease: false

.github/workflows/UnitTesting.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #
@@ -225,14 +225,14 @@ jobs:
 
           packages = {
             "coverage":            "python-coverage:p",
-            "docstr_coverage":     "python-pyaml:p",
+            "docstr_coverage":     "python-pyaml:p python-types-pyyaml:p",
             "igraph":              "igraph:p",
             "jinja2":              "python-markupsafe:p",
             "lxml":                "python-lxml:p",
             "numpy":               "python-numpy:p",
             "markupsafe":          "python-markupsafe:p",
             "pip":                 "python-pip:p",
-            "pyyaml":              "python-pyyaml:p",
+            "pyyaml":              "python-pyyaml:p python-types-pyyaml:p",
             "ruamel.yaml":         "python-ruamel-yaml:p",
           #  "ruamel.yaml":         "python-ruamel-yaml:p python-ruamel.yaml.clib:p",
             "sphinx":              "python-markupsafe:p",
@@ -240,6 +240,7 @@ jobs:
             "wheel":               "python-wheel:p",
             "pyedaa.projectmodel": "python-ruamel-yaml:p python-ruamel.yaml.clib:p python-lxml:p",
             "pyedaa.reports":      "python-ruamel-yaml:p python-ruamel.yaml.clib:p python-lxml:p",
+            "sphinx-reports":      "python-markupsafe:p python-pyaml:p python-types-pyyaml:p",
           }
           subPackages = {
             "pytooling": {
@@ -342,6 +343,7 @@ jobs:
 
       - name: ✅ Run unit tests (Ubuntu/macOS)
         if: matrix.system != 'windows'
+        continue-on-error: true
         run: |
           export ENVIRONMENT_NAME="${{ matrix.envname }}"
           export PYTHONPATH=$(pwd)

.github/workflows/VerifyDocs.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

.github/workflows/_Checking_JobTemplates.yml

@@ -5,11 +5,20 @@ on:
   workflow_dispatch:
 
 jobs:
+  Prepare:
+    uses: pyTooling/Actions/.github/workflows/PrepareJob.yml@main
+
   ConfigParams:
     uses: pyTooling/Actions/.github/workflows/ExtractConfiguration.yml@main
     with:
       package_name: pyDummy
 
+  InstallParams:
+    uses: pyTooling/Actions/.github/workflows/Parameters.yml@main
+    with:
+      package_name:        pyDummy
+      python_version_list: ''
+
   UnitTestingParams:
     uses: pyTooling/Actions/.github/workflows/Parameters.yml@main
     with:
@@ -69,8 +78,8 @@ jobs:
       python_version: ${{ needs.UnitTestingParams.outputs.python_version }}
       commands: |
         ${{ needs.ConfigParams.outputs.mypy_prepare_command }}
-        mypy --html-report htmlmypy -p ${{ needs.ConfigParams.outputs.package_fullname }}
+        mypy --html-report report/typing -p ${{ needs.ConfigParams.outputs.package_fullname }}
-      html_report:   'htmlmypy'
+      html_report:   'report/typing'
       html_artifact: ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).statictyping_html }}
 
   DocCoverage:
@@ -80,19 +89,31 @@ jobs:
       - UnitTestingParams
     with:
       python_version: ${{ needs.UnitTestingParams.outputs.python_version }}
-      directory     : ${{ needs.ConfigParams.outputs.package_directors }}
+      directory     : ${{ needs.ConfigParams.outputs.package_directory }}
 #      fail_below: 70
 
   Package:
     uses: pyTooling/Actions/.github/workflows/Package.yml@main
     needs:
       - UnitTestingParams
-      - UnitTesting
+#      - UnitTesting
-      - PlatformTesting
+#      - PlatformTesting
     with:
       python_version: ${{ needs.UnitTestingParams.outputs.python_version }}
       artifact:       ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).package_all }}
 
+  Install:
+    uses: pyTooling/Actions/.github/workflows/InstallPackage.yml@main
+    needs:
+      - ConfigParams
+      - UnitTestingParams
+      - InstallParams
+      - Package
+    with:
+      jobs:         ${{ needs.InstallParams.outputs.python_jobs }}
+      wheel:        ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).package_all }}
+      package_name: ${{ needs.ConfigParams.outputs.package_fullname }}
+
   PublishCoverageResults:
     uses: pyTooling/Actions/.github/workflows/PublishCoverageResults.yml@main
     needs:
@@ -112,9 +133,7 @@ jobs:
       coverage_report_html_directory: ${{ needs.ConfigParams.outputs.coverage_report_html_directory }}
       codecov:                        true
       codacy:                         true
-    secrets:
+    secrets: inherit
-      CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
-      CODACY_TOKEN:  ${{ secrets.CODACY_PROJECT_TOKEN }}
 
   PublishTestResults:
     uses: pyTooling/Actions/.github/workflows/PublishTestResults.yml@main
@@ -129,8 +148,7 @@ jobs:
       merged_junit_artifact:  ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).unittesting_xml }}
       codecov:                true
       dorny:                  true
-    secrets:
+    secrets: inherit
-      CODECOV_TOKEN:          ${{ secrets.CODECOV_TOKEN }}
 
 #  VerifyDocs:
 #    uses: pyTooling/Actions/.github/workflows/VerifyDocs.yml@main
@@ -161,7 +179,6 @@ jobs:
       - UnitTestingParams
       - PublishCoverageResults
       - PublishTestResults
-      - Documentation
     with:
       sqlite_coverage_artifacts_prefix: ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).codecoverage_sqlite }}-
       xml_unittest_artifacts_prefix:    ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).unittesting_xml }}-
@@ -189,29 +206,54 @@ jobs:
       coverage: ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).codecoverage_html }}
       typing:   ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).statictyping_html }}
 
-  ReleasePage:
+  TriggerTaggedRelease:
-    uses: pyTooling/Actions/.github/workflows/Release.yml@main
+    uses: pyTooling/Actions/.github/workflows/TagReleaseCommit.yml@main
-    if: startsWith(github.ref, 'refs/tags')
     needs:
+      - Prepare
       - UnitTesting
       - PlatformTesting
+      - Install
 #      - StaticTypeCheck
       - Package
       - PublishToGitHubPages
+    permissions:
+      contents: write  # required for create tag
+      actions:  write  # required for trigger workflow
+    with:
+      version:  ${{ needs.Prepare.outputs.version }}
+      auto_tag: ${{ needs.Prepare.outputs.is_release_commit }}
+    secrets: inherit
+
+  ReleasePage:
+    uses: pyTooling/Actions/.github/workflows/PublishReleaseNotes.yml@main
+    needs:
+      - Prepare
+      - UnitTesting
+      - PlatformTesting
+      - Install
+#      - StaticTypeCheck
+      - Package
+      - PublishToGitHubPages
+    if: needs.Prepare.outputs.is_release_tag == 'true'
+    permissions:
+      contents: write
+      actions:  write
+    with:
+      tag: ${{ needs.Prepare.outputs.version }}
+    secrets: inherit
 
   PublishOnPyPI:
     uses: pyTooling/Actions/.github/workflows/PublishOnPyPI.yml@main
-    if: startsWith(github.ref, 'refs/tags')
     needs:
       - UnitTestingParams
       - ReleasePage
 #      - Package
+    if: needs.Prepare.outputs.is_release_tag == 'true'
     with:
       python_version: ${{ needs.UnitTestingParams.outputs.python_version }}
       requirements: -r dist/requirements.txt
       artifact: ${{ fromJson(needs.UnitTestingParams.outputs.artifact_names).package_all }}
-    secrets:
+    secrets: inherit
-      PYPI_TOKEN: ${{ secrets.PYPI_TOKEN }}
 
   ArtifactCleanUp:
     uses: pyTooling/Actions/.github/workflows/ArtifactCleanUp.yml@main

.github/workflows/_Checking_NamespacePackage_Pipeline.yml

@@ -16,4 +16,4 @@ jobs:
     secrets:
       PYPI_TOKEN:    ${{ secrets.PYPI_TOKEN }}
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
-      CODACY_PROJECT_TOKEN: ${{ secrets.CODACY_PROJECT_TOKEN }}
+      CODACY_TOKEN:  ${{ secrets.CODACY_TOKEN }}

.github/workflows/_Checking_Nightly.yml

@@ -45,11 +45,9 @@ jobs:
     uses: pyTooling/Actions/.github/workflows/NightlyRelease.yml@main
     needs:
       - Build
-    secrets: inherit
     permissions:
       contents: write
       actions:  write
-#      attestations: write
     with:
       can-fail: true
       prerelease: true
@@ -78,16 +76,15 @@ jobs:
         document:$archive7.tar.gz: Archive 7 - tar.gz + dir
         document:$archive8.tzst:   Archive 8 - tzst + dir
         document:$archive9.tar.zst:Archive 9 - tar.zst + dir
+    secrets: inherit
 
   NightlyPageWithInventory:
     uses: ./.github/workflows/NightlyRelease.yml
     needs:
       - Build
-    secrets: inherit
     permissions:
       contents: write
       actions:  write
-#      attestations: write
     with:
       can-fail: true
       replacements: |
@@ -121,3 +118,4 @@ jobs:
         document:$archive7.tar.gz:            Archive 7 - tar.gz + dir
         document:$archive8.tzst:              Archive 8 - tzst + dir
         document:$archive9.tar.zst:           Archive 9 - tar.zst + dir
+    secrets: inherit

.github/workflows/_Checking_SimplePackage_Pipeline.yml

@@ -16,4 +16,4 @@ jobs:
     secrets:
       PYPI_TOKEN:    ${{ secrets.PYPI_TOKEN }}
       CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
-      CODACY_PROJECT_TOKEN: ${{ secrets.CODACY_PROJECT_TOKEN }}
+      CODACY_TOKEN:  ${{ secrets.CODACY_TOKEN }}

README.md

@@ -77,7 +77,7 @@ As shown in the screenshots above, the expected order is:
 
   [**NightlyRelease**](.github/workflows/NightlyRelease.yml): publish GitHub Release.
 
-  [**Release**](.github/workflows/Release.yml): publish GitHub Release.
+  [**PublishReleaseNotes**](.github/workflows/PublishReleaseNotes.yml): publish GitHub Release.
 - **Documentation:**  
   [**SphinxDocumentation**](.github/workflows/PublishCoverageResults.yml): create HTML and LaTeX documentation using
   Sphinx.

doc/JobTemplate/CoverageCollection.rst

@@ -55,8 +55,7 @@ Simple Example
        uses: pyTooling/Actions/.github/workflows/CoverageCollection.yml@r0
        with:
          artifact: Coverage
-       secrets:
+       secrets: inherit
-         codacy_token: ${{ secrets.CODACY_PROJECT_TOKEN }}
 
 Complex Example
 ===============
@@ -71,8 +70,7 @@ Complex Example
        with:
          python_version: ${{ needs.Params.outputs.python_version }}
          artifact: ${{ fromJson(needs.Params.outputs.artifact_names).codecoverage_html }}
-       secrets:
+       secrets: inherit
-         codacy_token: ${{ secrets.CODACY_PROJECT_TOKEN }}
 
 Parameters
 **********

doc/conf.py

@@ -1,20 +1,29 @@
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
 # documentation root, use os.path.abspath to make it absolute, like shown here.
-from importlib.util import find_spec
 from sys import path as sys_path
 from os.path import abspath
 from pathlib import Path
-from json import loads
 
 from pyTooling.Packaging import extractVersionInformation
 
+# ==============================================================================
+# Project configuration
+# ==============================================================================
+githubNamespace = "pyTooling"
+githubProject = "Actions"
+pythonProject = "pyDummy"
+directoryName = pythonProject.replace('.', '/')
+
+
+# ==============================================================================
+# Project paths
+# ==============================================================================
 ROOT = Path(__file__).resolve().parent
 
 sys_path.insert(0, abspath("."))
 sys_path.insert(0, abspath(".."))
-sys_path.insert(0, abspath("../pyDummy"))
+sys_path.insert(0, abspath(f"../{directoryName}"))
-# sys_path.insert(0, abspath("_extensions"))
 
 
 # ==============================================================================
@@ -23,11 +32,7 @@ sys_path.insert(0, abspath("../pyDummy"))
 # The version info for the project you're documenting, acts as replacement for
 # |version| and |release|, also used in various other places throughout the
 # built documents.
-githubNamespace = "pyTooling"
+packageInformationFile = Path(f"../{directoryName}/__init__.py")
-githubProject = "Actions"
-project = "pyDummy"
-
-packageInformationFile = Path(f"../{project}/__init__.py")
 versionInformation = extractVersionInformation(packageInformationFile)
 
 author =    versionInformation.Author
@@ -105,7 +110,7 @@ html_last_updated_fmt = "%d.%m.%Y"
 # Python settings
 # ==============================================================================
 modindex_common_prefix = [
-	f"{project}."
+	f"{pythonProject}."
 ]
 
 # ==============================================================================
@@ -257,13 +262,13 @@ todo_link_only = True
 # ==============================================================================
 # report_unittest_testsuites = {
 # 	"src": {
-# 		"name":        f"{project}",
+# 		"name":        f"{pythonProject}",
 # 		"xml_report":  "../report/unit/unittest.xml",
 # 	}
 # }
 # report_codecov_packages = {
 # 	"src": {
-# 		"name":        f"{project}",
+# 		"name":        f"{pythonProject}",
 # 		"json_report": "../report/coverage/coverage.json",
 # 		"fail_below":  80,
 # 		"levels":      "default"
@@ -271,8 +276,8 @@ todo_link_only = True
 # }
 # report_doccov_packages = {
 # 	"src": {
-# 		"name":       f"{project}",
+# 		"name":       f"{pythonProject}",
-# 		"directory":  f"../{project}",
+# 		"directory":  f"../{directoryName}",
 # 		"fail_below": 80,
 # 		"levels":     "default"
 # 	}
@@ -289,17 +294,17 @@ todo_link_only = True
 # AutoAPI.Sphinx
 # ==============================================================================
 autoapi_modules = {
-	f"{project}":  {
+	f"{pythonProject}":  {
 		"template": "package",
-		"output":   project,
+		"output":   pythonProject,
 		"override": True
 	}
 }
 
-for directory in [mod for mod in Path(f"../{project}").iterdir() if mod.is_dir() and mod.name != "__pycache__"]:
+for directory in [mod for mod in Path(f"../{directoryName}").iterdir() if mod.is_dir() and mod.name != "__pycache__"]:
-	print(f"Adding module rule for '{project}.{directory.name}'")
+	print(f"Adding module rule for '{pythonProject}.{directory.name}'")
-	autoapi_modules[f"{project}.{directory.name}"] = {
+	autoapi_modules[f"{pythonProject}.{directory.name}"] = {
 		"template": "module",
-		"output":   project,
+		"output":   pythonProject,
 		"override": True
 	}

doc/coverage/index.rst

@@ -4,4 +4,4 @@ Code Coverage Report
 Code coverage report generated with `pytest <https://github.com/pytest-dev/pytest>`__ and `Coverage.py <https://github.com/nedbat/coveragepy/tree/master>`__.
 
 .. #report:code-coverage::
-   :packageid: src
+   :reportid: src

doc/make.bat

@@ -5,7 +5,7 @@ pushd %~dp0
 REM Command file for Sphinx documentation
 
 if "%SPHINXBUILD%" == "" (
-	set SPHINXBUILD=sphinx-build
+	set SPHINXBUILD=py -3.13 -m sphinx.cmd.build
 )
 set SOURCEDIR=.
 set BUILDDIR=_build

doc/requirements.txt

@@ -1,6 +1,6 @@
 -r ../requirements.txt
 
-pyTooling ~= 8.4
+pyTooling ~= 8.5
 
 # Enforce latest version on ReadTheDocs
 sphinx ~= 8.2
@@ -15,5 +15,5 @@ sphinxcontrib-mermaid ~= 1.0
 autoapi >= 2.0.1
 sphinx_design ~= 0.6.1
 sphinx-copybutton >= 0.5.2
-sphinx_autodoc_typehints ~= 3.1
+sphinx_autodoc_typehints ~= 3.2
-sphinx_reports ~= 0.7
+sphinx_reports ~= 0.9

pyDummy/__init__.py

@@ -36,7 +36,7 @@ __author__ =        "Patrick Lehmann"
 __email__ =         "Paebbels@gmail.com"
 __copyright__ =     "2017-2025, Patrick Lehmann"
 __license__ =       "Apache License, Version 2.0"
-__version__ =       "0.4.4"
+__version__ =       "0.4.5"
 __keywords__ =      ["GitHub Actions"]
 __issue_tracker__ = "https://GitHub.com/pyTooling/Actions/issues"
 
@@ -53,9 +53,9 @@ class Base:
 	_value: int    #: An internal value.
 
 	def __init__(self) -> None:
-		"""
+		# """
-		Initializes the base-class.
+		# Initializes the base-class.
-		"""
+		# """
 		self._value = 0
 
 	@readonly
@@ -75,9 +75,9 @@ class Application(Base):
 	"""
 
 	def __init__(self) -> None:
-		"""
+		# """
-		Initializes the dummy application.
+		# Initializes the dummy application.
-		"""
+		# """
 		super().__init__()
 
 		platform = Platform()

pyproject.toml

@@ -1,8 +1,8 @@
 [build-system]
 requires = [
-  "setuptools ~= 78.1",
+  "setuptools >= 80.0",
   "wheel ~= 0.45",
-  "pyTooling ~= 8.4"
+  "pyTooling ~= 8.5"
 ]
 build-backend = "setuptools.build_meta"
 

releaser/action.yml

@@ -3,7 +3,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

releaser/composite/action.yml

@@ -3,7 +3,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #

requirements.txt

@@ -1 +1 @@
-pyTooling ~= 8.4
+pyTooling ~= 8.5

run.ps1

@@ -88,7 +88,7 @@ if ($build)
   rm -Force .\build\bdist.win-amd64
   rm -Force .\build\lib
   Write-Host -ForegroundColor Yellow        "[live][BUILD]      Building $PackageName package as wheel ..."
-  py -3.13 -m build --wheel
+  py -3.13 -m build --wheel --no-isolation
 
   Write-Host -ForegroundColor Yellow        "[live][BUILD]      Building wheel finished"
 }

setup.py

@@ -39,7 +39,8 @@ packageName =            "pyDummy"
 packageDirectory =       packageName
 packageInformationFile = Path(f"{packageDirectory}/__init__.py")
 
-setup(**DescribePythonPackageHostedOnGitHub(
+setup(
+	**DescribePythonPackageHostedOnGitHub(
 		packageName=packageName,
 		description="pyDummy is a test package to verify GitHub actions for Python projects.",
 		gitHubNamespace=gitHubNamespace,
@@ -47,5 +48,7 @@ setup(**DescribePythonPackageHostedOnGitHub(
 		sourceFileWithVersion=packageInformationFile,
 		dataFiles={
 			packageName: ["py.typed"]
-	}
+		},
-))
+		debug=True
+	)
+)

tests/requirements.txt

@@ -1,13 +1,13 @@
 -r ../requirements.txt
 
 # Coverage collection
-Coverage ~= 7.8
+Coverage ~= 7.9
 
 # Test Runner
-pytest ~= 8.3
+pytest ~= 8.4
-pytest-cov ~= 6.1
+pytest-cov ~= 6.2
 
 # Static Type Checking
-mypy ~= 1.15
+mypy ~= 1.16
 typing_extensions ~= 4.13
-lxml ~= 5.3
+lxml ~= 5.4

with-post-step/action.yml

@@ -4,7 +4,7 @@
 #   Unai Martinez-Corral                                                                                               #
 #                                                                                                                      #
 # ==================================================================================================================== #
-# Copyright 2020-2024 The pyTooling Authors                                                                            #
+# Copyright 2020-2025 The pyTooling Authors                                                                            #
 #                                                                                                                      #
 # Licensed under the Apache License, Version 2.0 (the "License");                                                      #
 # you may not use this file except in compliance with the License.                                                     #